Cross stitch
Aida Cloth Count
Enter a design's size in stitches, choose an aida count and a margin. You get the stitched size, the fabric to cut, and the number of floss strands that suit that count.
Published Nov 1, 2026
Worked example
- 11 count aida gives 11 stitches per inch
- 100 ÷ 11 = 9⅛ in wide; 100 ÷ 11 = 9⅛ in tall
- Add 3 in on every side for framing or a hoop: 9⅛ + 6 = 15⅛, 9⅛ + 6 = 15⅛ in
Aida and evenweave counts
| Fabric | Stitches per inch | One stitch | Floss strands (full cross) |
|---|---|---|---|
| 11 count aida | 11 | 2.31 mm | 3 |
| 14 count aida | 14 | 1.81 mm | 2 |
| 16 count aida | 16 | 1.59 mm | 2 |
| 18 count aida | 18 | 1.41 mm | 1 or 2 |
| 20 count aida | 20 | 1.27 mm | 1 |
| 28 count evenweave over 2 | 14 | 1.81 mm | 2 |
| 32 count linen over 2 | 16 | 1.59 mm | 2 |
| 36 count linen over 2 | 18 | 1.41 mm | 1 or 2 |
Backstitch is usually worked with 1 strand. Stranded cotton floss comes in skeins of 8 m (about 8.7 yd) with 6 strands you separate.
A 100 × 100 stitch design on each count
| Fabric | Design | Fabric to cut (3 in margins) |
|---|---|---|
| 11 count aida | 9⅛ × 9⅛ in | 15⅛ × 15⅛ in |
| 14 count aida | 7⅛ × 7⅛ in | 13⅛ × 13⅛ in |
| 16 count aida | 6¼ × 6¼ in | 12¼ × 12¼ in |
| 18 count aida | 5½ × 5½ in | 11½ × 11½ in |
| 20 count aida | 5 × 5 in | 11 × 11 in |
| 28 count evenweave over 2 | 7⅛ × 7⅛ in | 13⅛ × 13⅛ in |
| 32 count linen over 2 | 6¼ × 6¼ in | 12¼ × 12¼ in |
| 36 count linen over 2 | 5½ × 5½ in | 11½ × 11½ in |
What the count means
Aida is an open fabric woven in small blocks with a hole at each corner, so the grid for cross stitch is built into the cloth. Its count is the number of those squares in one inch. 14 count aida has 14 squares per inch, and each cross stitch covers one square. A higher count means smaller squares and a smaller, finer design from the same chart.
Divide 25.4 mm by the count and you get the size of one stitch: 2.31 mm on 11 count, 1.81 mm on 14, 1.27 mm on 20. Those numbers are small, but across 100 stitches they add up. The same 100 × 100 design is 9⅛ in square on 11 count and only 5 in on 20 count.
Choosing a count
11 count has the largest holes and stitches. It is easy to see and count, and a good choice for a first piece or for anyone who finds small holes hard on the eyes. It does make a big design bigger, so check the size before you start.
14 count is the middle ground: the stitches are still easy to see, and a design comes out at a moderate size. 16 and 18 count give finer detail and a smaller finished piece, at the cost of more squinting. 20 count is the finest count in the chart and suits small, detailed work. A good test: if you are going to frame it, decide on the frame size first and let that choose the count.
Strands follow the count
Embroidery floss comes in skeins of six strands, 8 m (about 8.7 yd) long, and you separate the strands before stitching. The bigger the square, the more strands it takes to cover it: three for full crosses on 11 count, two on 14 and 16, one or two on 18, and one on 20. Backstitch is usually worked with a single strand on any count.
If the fabric shows through your crosses, add a strand. If the stitches look lumpy and the holes stretch, take one away. Stitch a few crosses in a corner of the margin to test before you start the design.
Aida or evenweave
Evenweave and linen have no blocks; you count threads instead and usually stitch over two threads each way. That halves the count: 28 count evenweave over two gives 14 stitches per inch, the same as 14 count aida, and 32 and 36 count linen match 16 and 18 count aida. Evenweave takes a little more care, because you count threads rather than squares.
Whatever the fabric, use a tapestry needle, which has a blunt tip that slips through the holes without splitting the threads. The hand sewing needle sizes page covers the numbering. To size a full chart with any margin, use the cross stitch calculator.
Questions
What does 14 count aida mean?
It has 14 squares, and so 14 cross stitches, per inch. A design 140 stitches wide is 10 in wide on it.
Which aida count is best for beginners?
11 or 14 count. The holes are large enough to see and count easily.
How many strands of floss for 14 count aida?
Two strands for full crosses and one for backstitch.
Does a higher count make the design smaller?
Yes. The same chart on 18 count is about three quarters the size it is on 14 count.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.