Table and bed
Tie Blanket Calculator
Type the finished center size, the fringe length and the strip width. You get the size to cut each fleece layer, the yardage to buy, the corner squares to remove and the number of knots you will tie.
Published Nov 1, 2026
Worked example
- Add the fringe on both sides: 50 + 2 × 4 = 58, 60 + 2 × 4 = 68 in
- Fleece is about 58 to 60 in wide, so one piece 68 in long = 2 yd per layer
- Cut 4 in squares from every corner, then 4 in cuts every 1 in along each side
- Tie each top strip to the strip under it: 220 knots
Tie blanket sizes and yards of fleece (4 in fringe, 1 in strips)
| Blanket | Center | Cut each layer | Fleece per layer | Both layers | Knots |
|---|---|---|---|---|---|
| Baby | 36 × 36 in | 44 × 44 in | 1¼ yd | 2½ yd | 144 |
| Lap | 36 × 48 in | 44 × 56 in | 1⅝ yd | 3¼ yd | 168 |
| Throw | 50 × 60 in | 58 × 68 in | 2 yd | 4 yd | 220 |
| Large throw | 50 × 64 in | 58 × 72 in | 2 yd | 4 yd | 228 |
| Twin topper | 50 × 80 in | 58 × 88 in | 2½ yd | 5 yd | 260 |
Baby blankets: sizes only. For safe sleep, follow the American Academy of Pediatrics: no loose blankets in the crib for babies under 12 months.
How many yards of fleece for a tie blanket
A throw for an adult, 50 × 60 in with a 4 in fringe, takes 2 yd of each of the two fleece pieces, 4 yd in all. The table above gives the number for every size: 1¼ yd per layer for a 36 × 36 in baby size, 1⅝ yd for a 36 × 48 in lap blanket and 2½ yd for a 50 × 80 in twin topper.
The rule: the longer side of the center plus two fringes, divided by 36 and rounded up to the next ⅛ yd. With 1½ yd of each piece instead of 2, the center comes out 46 in long.
What size is a tie blanket
Most tie blankets finish at about 50 × 60 in, the usual throw size. Length is up to you: 64 in suits someone tall, 80 in runs the length of a twin bed. Width is the limit, as the next section explains.
How a tie blanket goes together
A tie blanket is two layers of fleece the same size, laid wrong sides together, with a fringe cut all the way around and knotted top layer to bottom layer. There is no sewing and no hem. Fleece does not fray, so the cut strips stay neat.
The steps are the same at any size (drawn one by one on how to make a tie blanket):
- Lay the two pieces wrong sides together and smooth them flat.
- Cut a square the size of the fringe out of every corner, through both layers.
- Cut strips along each side, as deep as the fringe and as wide as the strip setting.
- Tie each top strip to the strip directly under it, all the way around.
Why the cut size is bigger than the blanket
The fringe sits outside the finished center, so it is added on both sides. A 50 × 60 in center with a 4 in fringe needs each layer cut 58 × 68 in. Fleece is sold 58 to 60 in wide, which is the real limit on a tie blanket: the width of the fleece minus two fringes. With a 4 in fringe, that keeps the center at about 50 in wide. Want a wider blanket? You would need to join fleece, which takes away the no-sew part.
Length is easy, since you just buy more. The 68 in cut rounds up to 2 yd per layer, and you need two layers, often in two colors or a print and a solid.
Counting knots
With 1 in strips you get one strip per inch of center along every side, and the corner squares are cut away. So the count is just the edge of the center: 50 + 50 + 60 + 60 = 220 knots. The fringe length does not change it. A 5 in fringe on the same center still gives 220 knots, only longer ones.
That number is useful for planning. Tying a few hundred knots takes time, and it is a good job to share at a table with two or three people working on different sides.
Fringe and strip choices
A 4 in fringe with 1 in strips is the most common setting in instructions for these blankets, and 5 in also shows up. Wider strips mean fewer, chunkier knots. Before you cut the whole blanket, cut and tie a couple of strips at one corner to see the look. If the fleece has a directional print, check that both pieces face the same way before you cut the corners.
Other sizes
The table covers baby, lap, throw and twin topper sizes. Baby blankets here are sizes only: the American Academy of Pediatrics says nothing should be in the crib but a fitted sheet for babies under 12 months. For a quilted throw instead of fleece, see the lap quilt size page, and for a sewn blanket with a frayed edge, the rag quilt calculator.
Questions
How many yards of fleece do I need for an adult tie blanket?
2 yd of each of two pieces, 4 yd in all, for a 50 × 60 in center with a 4 in fringe.
What size is a tie blanket?
A typical throw has a 50 × 60 in center, cut from two 58 × 68 in pieces. Baby and lap sizes use a 36 in wide center.
How long should the fringe be on a tie blanket?
4 in is the most common, cut in 1 in wide strips. Some instructions use 5 in.
How many knots are in a tie blanket?
With 1 in strips, one knot per inch of the center's edge. A 50 × 60 in center has 220.
Do I need to hem a fleece tie blanket?
No. Fleece does not fray, so the cut fringe is the finished edge.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.