Sewing
Seam allowance
Type the finished size of a piece and the seam allowance you sew with. You get the size to cut, how much was added in total, and the size the piece will be once it is sewn in.
Published Nov 1, 2026
Worked example
- A piece is sewn on both sides, so it loses the allowance twice
- 4 + 2 × ¼ = 4½ in
- A row of 4 such pieces: 4 × 4½ − 6 × ¼ for the 3 seams = 16½ in, which is 4 × 4 + the outer allowances
Seam allowances by kind of sewing
| Sewing | Usual allowance | Cut size of a 4 in finished square |
|---|---|---|
| Quilt piecing | ¼ in | 4½ in |
| Rag quilts | ½ in | 5 in |
| Independent garment patterns | ⅜ or ½ in | 4¾ or 5 in |
| US commercial garment patterns | ⅝ in | 5¼ in |
| French seam (two passes) | ¼ in then ⅜ in | uses the full ⅝ in |
Cut sizes with a ¼ in seam
| Finished | Cut square | Cut HST square | Cut hourglass square |
|---|---|---|---|
| 1 in | 1½ in | 1⅞ in | 2¼ in |
| 1½ in | 2 in | 2⅜ in | 2¾ in |
| 2 in | 2½ in | 2⅞ in | 3¼ in |
| 2½ in | 3 in | 3⅜ in | 3¾ in |
| 3 in | 3½ in | 3⅞ in | 4¼ in |
| 4 in | 4½ in | 4⅞ in | 5¼ in |
| 5 in | 5½ in | 5⅞ in | 6¼ in |
| 6 in | 6½ in | 6⅞ in | 7¼ in |
Why the allowance is added twice
The seam allowance is the strip of fabric between the cut edge and the stitching line. It disappears into the seam, so it has to be added to every edge that gets sewn. A square in the middle of a quilt is sewn on both sides in each direction, which is why a 4 in finished square is cut at 4 + ¼ + ¼ = 4½ in, not 4¼.
The same logic works for a whole row. Four 4½ in squares laid end to end measure 18 in. Sewing them together uses 3 seams, and each one takes ¼ in from both neighbors, 6 allowances in all: 18 − 1½ = 16½ in. That is 4 × 4 in of finished squares plus the ¼ in still waiting on each outer edge. A row of six 3 in squares works the same way: 6 × 3½ = 21 in, minus 10 × ¼ in for 5 seams, gives 18½ in.
Which allowance goes with which sewing
Quilt piecing uses ¼ in, because the pieces are small and many seams stack up. The major US commercial garment patterns use ⅝ in, which leaves room to fit and alter. Many independent pattern designers print ⅜ or ½ in instead, so always check the pattern sheet before you cut. Rag quilts use ½ in because the allowance becomes the fringe; see the rag quilt calculator.
A French seam splits a ⅝ in allowance into two passes: first ¼ in with the wrong sides together, then trim, turn and sew ⅜ in to enclose the raw edge.
The scant quarter inch
Pressing a seam folds the fabric over the stitching, and that fold uses up a sliver of width. Sew a true ¼ in and press, and a block can come out a little small. A scant ¼ in, a thread or two inside the line, makes up for it. The error sounds tiny, but it repeats at every seam across a block, so it adds up fast.
Test your own seam: sew three 1½ in strips together and press. The middle strip should measure exactly 1 in. If it is narrower, move the needle or the guide slightly.
Triangles need more
Plain squares and rectangles add twice the allowance. Triangles have a seam on the long diagonal edge as well, so they need a bigger starting square. With ¼ in seams, a half-square triangle unit made two at a time starts from a square ⅞ in larger than the finished size, and an hourglass unit from one 1¼ in larger. A 4 in finished unit needs a 4⅞ in square for the half-square triangle and 5¼ in for the hourglass. The half-square triangle calculator handles other methods and sizes.
Common slip-ups
Whatever you choose, keep it the same through the whole project. A consistent allowance matters more than the exact number.
- Cutting to a finished size by mistake. Patterns give finished sizes, cut sizes or both, so check which number you are reading.
- Mixing allowances: a garment piece cut for ⅝ in and sewn at ½ in will come out larger.
- Forgetting the outer edges: a sewn row still has an allowance on each end until it joins the next piece.
Questions
What is the standard seam allowance?
¼ in for quilting and ⅝ in for US commercial garment patterns. Independent patterns often use ⅜ or ½ in, so read the pattern.
What is a scant ¼ in seam?
A seam sewn a thread or two narrower than ¼ in, so the fold taken up in pressing does not shrink the finished piece.
How do I add seam allowance to a quilt square?
Add twice the allowance to the finished size. With ¼ in seams that means adding ½ in: a 6 in finished square is cut at 6½ in.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.