Skip to content
broiderer

Quilt sizes

Quilt Size Chart

Pick your bed, then type how far the quilt should hang over the sides and the foot, and add a pillow tuck if you want one. You get the finished quilt size in inches and centimeters, the batting package that covers it, and the backing and binding to buy.

Published Nov 1, 2026

Your numbers

runs in your browser, nothing is saved

Queen quilt
90 × 95 in
In centimeters229 × 241 cm
Battingking package, 120 × 120 in
Backing (42 in fabric)8¼ yd
Binding (2½ in strips)¾ yd, 10 strips

Typical sizes. Brands differ by an inch or more; measure your bed or insert.

Worked example

  1. Width = mattress 60 in + 2 × 15 in drop = 90 in
  2. Length = mattress 80 in + 15 in at the foot = 95 in
  3. Backing and batting are 4 in bigger than the top on every side: 98 × 103 in
  4. Binding: perimeter 370 in + 12 in = 382 in

Quilt sizes for every bed (15 in drop)

BedMattressQuiltWith 10 in pillow tuckBatting package
Twin38 × 75 in68 × 90 in68 × 100 inQueen 90 × 108
Twin XL38 × 80 in68 × 95 in68 × 105 inQueen 90 × 108
Full54 × 75 in84 × 90 in84 × 100 inKing 120 × 120
Queen60 × 80 in90 × 95 in90 × 105 inKing 120 × 120
King76 × 80 in106 × 95 in106 × 105 inKing 120 × 120
California king72 × 84 in102 × 99 in102 × 109 inKing 120 × 120

Sizes most quilting charts list

QuiltTypical size (in)
Crib36 × 52
Lap or throw50 × 60
Twin68 to 72 × 86 to 92
Full84 × 90
Queen90 × 95
King108 × 95

Charts differ by a few inches; store-bought full/queen quilts are often 90 × 90 in.

Quilt size by drop: queen mattress (60 × 80 in)

DropQuiltWith 10 in tuck
10 in80 × 90 in80 × 100 in
12 in84 × 92 in84 × 102 in
15 in90 × 95 in90 × 105 in
18 in96 × 98 in96 × 108 in

Why the chart starts from the mattress

Most quilt charts print one number per bed, and they rarely agree. One says a queen is 90 × 95 in, another lists something a few inches off, and store-bought full/queen quilts are often a plain 90 × 90 in. They are all guesses at the same thing: the mattress top plus however much fabric hangs down.

That is why this chart works from the mattress. The rule is short: width is the mattress width plus the drop on both sides, length is the mattress length plus the drop at the foot, plus a pillow tuck if you want one. A queen mattress is 60 × 80 in, so a 15 in drop gives 90 × 95 in.

Choosing a drop

The drop is measured from the top edge of the mattress straight down. A 10 in drop is the most common default in quilting guides and covers the side of a standard 10 to 12 in mattress. A 15 in drop hangs past the mattress and covers part of a box spring or frame. Deep mattresses, 12 to 14 in or more, need the longer drop just to hide the sides.

Measure your own bed before you cut anything. Put a tape at the top edge of the mattress, let it hang, and decide where you want the quilt to stop.

The pillow tuck

A pillow tuck is the extra length that goes under and over the pillows at the head of the bed. 10 in is the usual allowance. It only changes the length, never the width, so a queen at a 15 in drop goes from 90 × 95 in to 90 × 105 in. If you like the quilt folded down at the head with the pillows on top, leave the tuck at 0.

What the backing, batting and binding numbers mean

Backing and batting are cut 4 in bigger than the top on every side, so the quilt can shift a little while it is quilted. For the queen example that is 98 × 103 in, which is too big for a queen batting package (90 × 108 in) and needs the king package. A longarm quilter may ask for more, so ask first.

Binding is the outside edge of the quilt plus 12 in for joining strips and turning corners. Our queen has a 370 in edge, so you need 382 in of 2½ in strips. The quilt backing calculator and the quilt binding calculator show the cutting in more detail.

Common mistakes

The biggest one is planning a bed quilt from a chart number without measuring the bed. The second is treating the chart size as fixed. If your blocks come out at 88 in across instead of 90, a slightly shorter drop is fine, or a border can make up the difference with the quilt border calculator. Once you know the size, how much fabric for a quilt turns it into yardage.

Questions

What is the most common queen quilt size?

Quilting charts usually give 90 × 95 in, which is a queen mattress with a 15 in drop. Ready-made quilts sold as full/queen are often 90 × 90 in.

Is a king quilt wider than it is long?

Yes. A king mattress is 76 × 80 in, so once the drop is added on both sides the quilt comes out wider than long: 106 × 95 in at a 15 in drop.

Do twin and twin XL beds need different quilts?

The width is the same, because both mattresses are 38 in wide. A twin XL is 5 in longer, so the quilt needs 5 more inches of length.

How big is a lap or throw quilt?

Most charts list 50 × 60 in. The lap quilt size page covers smaller and larger throws.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.