Skip to content
broiderer

Fabric

How much fabric is in a yard

Type how many yards you have and how wide the fabric is. You get the size of the piece, its area in square inches and feet, the metric size, and how many fat quarters, 5 in squares and 2½ in strips it will give you.

Published Nov 1, 2026

Your numbers

runs in your browser, nothing is saved

1 yd of 42 in fabric
36 × 42 in
Area1,512 sq in (10.5 sq ft)
In metric91.4 × 107 cm
Fat quarters (18 × 21 in)4
5 in squares56
2½ in strips across the width14

Typical values. Widths and weights vary by mill; check the bolt or the listing.

Worked example

  1. A yard is 36 in along the bolt, always; the width depends on the fabric
  2. 1 × 36 = 36 in long, 42 in wide
  3. Area: 36 × 42 = 1,512 sq in
  4. Pieces: 7 rows × 8 squares of 5 in = 56

Common cuts of 42 in fabric

CutSizeSquare inches5 in squares2½ in strips
⅛ yd4½ × 42 in18901
¼ yd9 × 42 in37883
⅓ yd12 × 42 in504164
½ yd18 × 42 in756247
⅔ yd24 × 42 in1,008329
¾ yd27 × 42 in1,1344010
1 yd36 × 42 in1,5125614

Yards, inches and meters

YardsInchesCentimetersMeters
¼922.90.23
½1845.70.46
¾2768.60.69
13691.40.91
1½54137.21.37
272182.91.83
3108274.32.74
4144365.83.66
5180457.24.57

One yard is exactly 0.9144 m; one meter is about 39.37 in.

A yard is a length, not a piece

When you ask for a yard at the cutting counter, the fabric is unrolled 36 in along the bolt and cut straight across. The 36 in never changes. The other side is whatever width the fabric was woven at, so a yard of quilting cotton and a yard of wide backing are very different pieces of cloth.

That is why the calculator asks for the width. At 42 in, one yard is 36 × 42 in, or 1,512 sq in. The same yard of 60 in fabric is 36 × 60 = 2,160 sq in, which is 15 sq ft. A yard of 108 in backing is 36 × 108 = 3,888 sq in, or 27 sq ft, more than two and a half times the quilting cotton yard.

Why the cut table uses 42 in

Quilting cotton is sold at 42 to 44 in on the bolt, but once you trim off the selvages you usually have 40 to 42 in you can actually use. The tables on this page use 42 in, which is a fair middle value. If your fabric measures narrower after you square it up, run the calculator with your own number, since one lost inch can drop the last square from each row.

The square counts come from simple rows. For the 1 yd example, 5 in squares fit 7 times along the 36 in length and 8 times across the 42 in width, so 7 × 8 = 56. On 60 in fabric the same yard gives 7 rows of 12, or 84 squares. Check the fabric widths page for the usual widths of apparel, home decor and backing fabrics.

Fat quarters, long quarters and the rest

A quarter yard can be cut two ways. A regular quarter is a 9 in slice across the full width, 9 × 42 in. A fat quarter is a half yard cut in half the other way, 18 × 21 in. Both hold 378 sq in, but the fat quarter is much easier to cut into blocks, which is why one yard is often described as 4 fat quarters. The fat quarter calculator works out how many you need for a given number of squares.

Odd cuts like ⅓ and ⅔ yd are handy for strip piecing. A ⅓ yd cut is 12 in long, so it gives exactly four 2½ in strips with a little left to straighten the edge.

Yards and meters

One yard is exactly 0.9144 m, set by international agreement in 1959, and one inch is exactly 2.54 cm. A meter is about 39.37 in, so it runs roughly 3⅜ in longer than a yard. If a pattern gives meters and your shop sells yards, convert and round up to the next ⅛ yd rather than down.

Common mistakes when buying by the yard

  • Forgetting that the cut edge is rarely perfectly straight. Allow a few inches to square it up.
  • Planning with the width on the label instead of the width after the selvages come off.
  • Skipping a test before prewashing. Cotton and linen can shrink, so wash a swatch and measure it before you count on every inch.
  • Buying exact yardage for a directional print, where every piece must point the same way and you lose cutting options. The fabric yardage calculator adds up a whole project.

Questions

How many inches are in a yard of fabric?

36 in along the length of the bolt. The width depends on the fabric, usually 42 to 44 in for quilting cotton.

How many fat quarters are in a yard?

Four. A yard of 42 in fabric is 36 × 42 in, which cuts into four pieces of 18 × 21 in.

Is a yard of fabric bigger than a meter?

No. A meter is about 39.37 in, so it is roughly 3⅜ in longer than a 36 in yard.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.