Skip to content
broiderer

Quilt sizes

Queen Quilt Size

Type the drop you want on the sides and at the foot of a queen bed, plus a pillow tuck if you use one. You get the quilt size, the batting package, the backing yardage and the binding strips.

Published Nov 1, 2026

Your numbers

runs in your browser, nothing is saved

Queen quilt
90 × 95 in
In centimeters229 × 241 cm
Battingking package, 120 × 120 in
Backing (42 in fabric)8¼ yd
Binding (2½ in strips)¾ yd, 10 strips

Typical sizes. Brands differ by an inch or more; measure your bed or insert.

Worked example

  1. Width = mattress 60 in + 2 × 15 in drop = 90 in
  2. Length = mattress 80 in + 15 in at the foot = 95 in
  3. Backing and batting are 4 in bigger than the top on every side: 98 × 103 in
  4. Binding: perimeter 370 in + 12 in = 382 in

Queen quilt at different drops

Drop (sides and foot)No pillow tuckWith 10 in pillow tuck
8 in76 × 88 in76 × 98 in
10 in80 × 90 in80 × 100 in
12 in84 × 92 in84 × 102 in
15 in90 × 95 in90 × 105 in
18 in96 × 98 in96 × 108 in
20 in100 × 100 in100 × 110 in

Mattress sizes (United States)

BedMattressQuilt, 15 in drop
Crib28 × 52 insee the crib table
Twin38 × 75 in68 × 90 in
Twin XL38 × 80 in68 × 95 in
Full54 × 75 in84 × 90 in
Queen60 × 80 in90 × 95 in
King76 × 80 in106 × 95 in
California king72 × 84 in102 × 99 in

Mattresses vary by about half an inch, and deep or pillow-top mattresses need a longer drop to cover the sides. Measure yours.

Why 90 × 95 in, and why stores sell 90 × 90

A queen mattress is 60 × 80 in. Add a 15 in drop on each side and you get 90 in across. Add the same 15 in at the foot and you get 95 in long. That is the size most quilting charts print for a queen.

Ready-made quilts are a different story. Many are sold as full/queen and measure 90 × 90 in, the same quilt labeled for both beds. On a queen that square gives 15 in on each side but only 10 in at the foot, and nothing for the pillows. If a store-bought quilt always looks a bit short on your bed, that is why, and it is a good reason to make your own a few inches longer.

Deep mattresses and pillow tops

Mattress depth matters on any bed, and it is easy to forget when you replace an old queen with a thicker one. A standard mattress is about 10 to 12 in deep, while thick ones run 12 to 14 in and more. A 10 in drop that covered an older mattress can leave the bottom edge showing on a newer one.

Measure from the top edge of your mattress down to where you want the quilt to stop, and use that as the drop. On a deep queen, an 18 in drop gives 96 × 98 in, and a 20 in drop gives 100 × 100 in, a square quilt.

Adding a pillow tuck

With a 10 in pillow tuck, the 15 in drop quilt becomes 90 × 105 in. The tuck adds length only. You can also skip it and fold the quilt back at the head with the pillows on top, which saves a row or two of piecing.

Batting and backing for a queen

Backing and batting are cut 4 in larger than the top on all sides, so the 90 × 95 in top needs 98 × 103 in. That is wider than a queen batting package (90 × 108 in), so the calculator picks the king package at 120 × 120 in. Plenty of quilters are caught out here: the queen package is sized for a smaller top.

With 42 in quilting cotton the backing takes three widths sewn together, 8¼ yd in all. A 108 in wide backing avoids the seams. The quilt backing calculator compares both, and quilt batting sizes lists every package.

Planning the top

Once you know the finished size, work backward to the blocks. A 90 in width divides evenly into 9 in, 10 in, 15 in or 18 in blocks, and a border can make up any gap. The quilt border calculator helps when the blocks fall a few inches short.

Questions

What size is a queen quilt?

Most quilting charts give 90 × 95 in, which is a 60 × 80 in queen mattress with a 15 in drop. Charts differ by a few inches, so measure your own bed.

Will a queen quilt fit a full bed?

Yes, it simply hangs lower. A full mattress is 54 in wide, 6 in narrower than a queen, so a 90 in wide quilt drops 18 in on each side.

What batting do I need for a queen quilt?

A 90 × 95 in top needs batting 98 × 103 in, which is a king package (120 × 120 in). A queen package (90 × 108 in) is too narrow.

How long should a queen quilt be with a pillow tuck?

Add 10 in to the length. At a 15 in drop that makes it 90 × 105 in.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.