Table and bed
Tablecloth Size Calculator
Enter your table's shape, width and length, and how far you want the cloth to hang over each edge. You get the finished tablecloth size, the nearest standard size you could buy, and the size to cut if you sew it yourself.
Published Nov 1, 2026
Worked example
- Width: 36 + 2 × 8 = 52 in
- Length: 60 + 2 × 8 = 76 in
- Pick the standard size at or above both numbers; the drop will be a little longer
- 6 to 8 in is a casual drop; floor length on a 30 in table is 30 in
Tablecloth size by table and drop
| Table | 6 in drop | 8 in drop | 15 in drop | Floor (30 in) |
|---|---|---|---|---|
| 36 × 48 in | 48 × 60 in | 52 × 64 in | 66 × 78 in | 96 × 108 in |
| 36 × 60 in | 48 × 72 in | 52 × 76 in | 66 × 90 in | 96 × 120 in |
| 40 × 72 in | 52 × 84 in | 56 × 88 in | 70 × 102 in | 100 × 132 in |
| 42 × 84 in | 54 × 96 in | 58 × 100 in | 72 × 114 in | 102 × 144 in |
| 30 × 72 in | 42 × 84 in | 46 × 88 in | 60 × 102 in | 90 × 132 in |
| 30 × 96 in | 42 × 108 in | 46 × 112 in | 60 × 126 in | 90 × 156 in |
Standard tablecloth sizes
| Shape | Sizes (in) |
|---|---|
| Oblong | 60 × 84, 60 × 102, 60 × 120, 90 × 132, 90 × 156 |
| Round | 70, 90, 108, 120, 132 |
| Square | 54 × 54, 60 × 60 |
Measure the tabletop, not the room
Every tablecloth comes from one rule: the table plus two drops, in each direction. A 36 × 60 in table with an 8 in drop needs 36 + 16 = 52 in across and 60 + 16 = 76 in along. So the only numbers you need are the top of your own table and the drop you like.
Measure the top edge to edge with a metal tape, not the base or the legs. If your table takes leaves, run the numbers for each length you use. For an oval table, measure at the widest and longest points and use the rectangle setting; the same rule applies.
Choosing your drop
A drop of 6 to 8 in is the everyday choice. It covers the edge of the table and stays out of the way when people sit down. Floor length is the other end: the drop equals the table height, and most dining tables are 28 to 30 in tall, with 30 in the most common. Measure yours from floor to tabletop before you trust 30.
In-between drops are where guides disagree. Anything from about 10 to 15 in reads as dressier than a casual cloth, but there is no agreed number for it, so pick what looks right on your table. Drape a sheet or a length of fabric over the table and pin it at a few heights before you commit.
Why the standard size has a longer drop
Ready-made cloths come in a short list of sizes, so the calculator rounds up to the first one that is at least as big as your number in both directions. For the 36 × 60 in table that is 60 × 84 in, which gives a 12 in drop on all four sides instead of 8. A cloth a little long still covers the table; one a little short does not.
If the extra length bothers you, that is the best reason to sew your own. You can make it exactly 52 × 76 in.
Sewing your own from the cut size
The cut size adds 2 in to each direction for a ½ in double hem: you fold ½ in, fold ½ in again, and stitch, which uses 1 in on every edge. That is how 52 × 76 in becomes a 54 × 78 in cut. Press both folds before you sew and the hem stays straight.
Width is the catch. Home decor fabric is usually 54 in wide and quilting cotton 42 to 44 in, so a 54 in cut sits right at the limit of decor fabric once you trim the selvages. If your cloth is wider than your fabric, put one full width down the center and add equal strips to both sides, so the seams fall near the table edges instead of down the middle. For very large cloths, 108 in wide backing fabric avoids seams altogether. The fabric widths chart lists what you can buy, and the fabric yardage calculator turns your cut size into yards.
Common mistakes
- Adding the drop once instead of twice. The cloth hangs on both sides.
- Forgetting the hem. A cloth cut at the finished size ends up 2 in short each way.
- Skipping the prewash. Cotton and linen shrink, so wash a swatch first and measure it before you cut the full piece.
Questions
How much should a tablecloth hang over the edge?
For everyday use, 6 to 8 in on each side. For a floor-length cloth, the drop equals the table height, usually 30 in.
What if my number falls between two standard sizes?
Go up to the larger one. The drop gets a little longer, but the table stays covered on every side.
Where do I find standard sizes and banquet tables?
The tablecloth size chart shows each standard oblong cloth and the tables it fits. Round tables have their own page: round tablecloth sizes.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.