Skip to content
broiderer

Cross stitch

Cross Stitch Calculator

Type the design's width and height in stitches, pick your fabric count and the margin you want around it. You get the stitched size in inches and centimeters, the piece of fabric to cut, the floss strands to use, and the total number of stitches.

Published Nov 1, 2026

Your numbers

runs in your browser, nothing is saved

Design size
10 × 7⅛ in (25.4 × 18.1 cm)
Fabric to cut16 × 13⅛ in
Floss2 strands for full crosses on 14 count aida
Stitches14,000 if every square is stitched

Estimates. Fabric counts vary a little between mills; leave generous margins for framing.

Worked example

  1. 14 count aida gives 14 stitches per inch
  2. 140 ÷ 14 = 10 in wide; 100 ÷ 14 = 7⅛ in tall
  3. Add 3 in on every side for framing or a hoop: 10 + 6 = 16, 7⅛ + 6 = 13⅛ in

Size of a 140 × 100 stitch design on each fabric

FabricStitches per inchDesign sizeFabric with 3 in margins
11 count aida1112¾ × 9⅛ in18¾ × 15⅛ in
14 count aida1410 × 7⅛ in16 × 13⅛ in
16 count aida168¾ × 6¼ in14¾ × 12¼ in
18 count aida187¾ × 5½ in13¾ × 11½ in
20 count aida207 × 5 in13 × 11 in
28 count evenweave over 21410 × 7⅛ in16 × 13⅛ in
32 count linen over 2168¾ × 6¼ in14¾ × 12¼ in
36 count linen over 2187¾ × 5½ in13¾ × 11½ in

Design size by stitch count (14 count)

StitchesInchesCentimeters
503⅝ in9.1 cm
705 in12.7 cm
1007⅛ in18.1 cm
14010 in25.4 cm
20014¼ in36.3 cm
25017⅞ in45.4 cm
30021⅜ in54.4 cm

Stitches divided by count

A cross stitch chart counts squares, not inches. The fabric decides how big each square turns out. On 14 count aida there are 14 stitches to the inch, so a design 140 stitches wide is 140 ÷ 14 = 10 in wide, and 100 stitches tall is 7⅛ in. Change the fabric and the same chart changes size: on 18 count the design shrinks to 7¾ × 5½ in, on 11 count it grows to 12¾ × 9⅛ in.

Sizes are rounded to the nearest ⅛ in, close enough for buying fabric and a frame. If a pattern does not list its stitch count, count the squares across the widest and tallest stitched rows of the chart.

The margin is what you cut

The fabric to cut is the design plus a margin on every side. The calculator starts at 3 in, which gives room to hold the work in a hoop and to mount it later: 10 + 6 = 16 in by 7⅛ + 6 = 13⅛ in. For a piece going into a frame with a wide mat, 4 in is safer. Cutting too small is the one mistake you cannot fix later, so round up when unsure.

If you plan to work in a hoop, check that the hoop clears the stitched area or that you can move it as you go. The embroidery hoop sizes page lists the common diameters.

Evenweave and linen over two

Evenweave and linen are counted by threads, and cross stitch on them usually covers two threads each way. So stitches per inch is half the thread count: 28 count over two gives 14 stitches per inch, the same size as 14 count aida. That is why the chart shows the same design size for 14 count aida and 28 count evenweave, and the same again for 16 count aida and 32 count linen. Read the count printed on the fabric and halve it before you enter it.

Floss and stitch count

Floss is sold in skeins of six strands, 8 m (about 8.7 yd) long, and you separate the strands to stitch. Two strands is the usual choice for full crosses on 14 count, three on 11 count, and one or two on 18 count. Backstitch outlines usually use one. Too many strands crowd the holes; too few let the fabric show between stitches.

The stitch total assumes every square is filled. Most designs leave background fabric bare, so treat 14,000 as a ceiling for a 140 × 100 chart, and use it to compare how much work two patterns are. For what each fabric count looks like, see aida cloth count.

Questions

How do I work out the size of a cross stitch design?

Divide the number of stitches by the fabric's stitches per inch. 140 stitches on 14 count is 10 in.

How big will a 200 stitch design be on 18 count?

200 ÷ 18 = 11⅛ in. On 14 count the same design is 14¼ in.

How much fabric margin should I leave?

About 3 in on every side for most work, and up to 4 in if the piece will be framed.

Is 28 count evenweave the same as 14 count aida?

When you stitch over two threads, yes: both give 14 stitches per inch and the same finished size.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.