Skip to content
broiderer

Sewing

Bias tape calculator

Type the side of your fabric square, the width you cut the bias strips and, if you have a target, the length you need. You get the continuous bias the square gives and the square size for your length.

Published Nov 1, 2026

Your numbers

runs in your browser, nothing is saved

Continuous bias from this square
162 in (4.5 yd)
Square for your length30 in (⅞ yd of 42 in fabric)
Strip width2 in

Starting points, not rules. Test on a scrap of your fabric first.

Worked example

  1. Area ÷ strip width = length: 18 × 18 ÷ 2 = 162 in
  2. Seams and the angled ends cost a few inches; plan on about 5 percent less
  3. For 400 in: √(400 × 2) = 28.3 in, plus 1 in = 30 in square

Continuous bias from a square

Square1½ in strips2 in strips2¼ in strips2½ in strips
12 in2.7 yd2.0 yd1.8 yd1.6 yd
15 in4.2 yd3.1 yd2.8 yd2.5 yd
18 in6.0 yd4.5 yd4.0 yd3.6 yd
20 in7.4 yd5.6 yd4.9 yd4.4 yd
24 in10.7 yd8.0 yd7.1 yd6.4 yd
27 in13.5 yd10.1 yd9.0 yd8.1 yd
30 in16.7 yd12.5 yd11.1 yd10.0 yd
36 in24.0 yd18.0 yd16.0 yd14.4 yd

Bias tape widths

Cut stripSingle foldDouble fold
1 in½ in¼ in
1½ in¾ in⅜ in
2 in1 in½ in

Why bias, and when you need it

Woven fabric has almost no give along the lengthwise grain, a little across it, and the most at 45 degrees to both, on the true bias. A strip cut on that angle can bend around a curve and lie flat. That is why bias tape is used on armholes, necklines, round placemats, scalloped quilt edges and anything else that is not straight.

For a quilt with straight sides, binding strips cut across the width are simpler and use less fabric; the quilt binding calculator covers that case.

How the length is worked out

With the continuous method you cut a square in half on the diagonal, sew the two triangles into a slanted tube, mark lines at your strip width and cut around in one long spiral. Nothing is lost but a few seams, so the length is close to the area of the square divided by the strip width. An 18 in square holds 324 square inches; divided by 2 in, that is 162 in, or 4.5 yd.

In practice the seams and the angled ends cost a few inches, so plan on about 5 percent less. For the 18 in square, count on roughly 154 in of usable tape.

Working backward from a length

To find the square, multiply the length by the strip width and take the square root, then add 1 in for the seams. For 400 in of 2 in strips: 400 × 2 = 800, the root is 28.3, plus 1 is 29.3, rounded up to a 30 in square. That fits in ⅞ yd of 42 in fabric.

A bias-bound queen quilt shows how fast it grows. 382 in of 2½ in binding needs √(382 × 2½) = 30.9 in, plus 1, so a 32 in square, which takes 1 yd of fabric.

Strip width and finished tape

Single-fold tape folds both long edges to the middle, so it finishes at half the cut width. Double-fold tape is then folded once more down the center, a quarter of the cut width. A 2 in strip makes 1 in single-fold or ½ in double-fold tape. For quilt binding, which is folded in half rather than pressed into tape, the usual cut is 2¼ or 2½ in.

Because bias stretches, handle it gently while you press. Fold and press a short length first and measure it, so you know the width is right before you press the whole spiral.

Fabric choice

Pick a fabric that holds a pressed fold, and test a scrap if you are unsure. A stripe or a plaid cut on the bias turns into a diagonal pattern, which can look good on a plain garment. Check your fabric width first; see fabric widths if you are buying.

Questions

How much bias tape does a fat quarter make?

A fat quarter is about 18 × 21 in, so the largest square you can cut is 18 in. Cut into 2 in strips that gives about 162 in, or 4.5 yd, before seam losses.

What width do I cut for ½ in double-fold bias tape?

Cut 2 in strips. Double fold finishes at a quarter of the cut width.

How big a square for 5 yd of bias binding?

5 yd is 180 in. At 2½ in: √(180 × 2½) = 21.2 in, plus 1, so a 23 in square.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.