Skip to content
broiderer

Quilt sizes

Lap Quilt Size

Type the width and length you want for a lap quilt or throw. You get its area, the batting package that covers it, the backing yardage and the binding strips.

Published Nov 1, 2026

Your numbers

runs in your browser, nothing is saved

Lap quilt
50 × 60 in
Area20.8 sq ft
Battingtwin package, 72 × 90 in
Backing (42 in fabric)3¼ yd
Binding (2½ in strips)½ yd, 6 strips

Typical sizes. Brands differ by an inch or more; measure your bed or insert.

Worked example

  1. Backing and batting: 50 + 8 by 60 + 8 = 58 × 68 in
  2. Backing panels: 2 of 58 in = 3¼ yd
  3. Binding: 2 × (50 + 60) + 12 = 232 in

Lap and throw sizes

UseSizeBackingBatting
Over the knees in a chair36 × 48 in2½ ydcrib 45 × 60
Small lap quilt40 × 50 in2¾ ydthrow 60 × 60
Lap or throw (most charts)50 × 60 in3¼ ydtwin 72 × 90
Couch throw, long50 × 70 in3¼ ydtwin 72 × 90
Large throw60 × 72 in3⅞ ydtwin 72 × 90

No bed, so no fixed size

Bed quilts are sized from a mattress. A lap quilt is sized from a person and a chair, which is why this calculator asks for width and length directly instead of a drop. Most quilting charts list 50 × 60 in as the lap or throw size, and blanket makers use the same 50 × 60 in for a throw. A smaller lap blanket is 36 × 48 in.

Think about where it will live. A quilt that sits over the knees in an armchair only needs to reach from the waist to the ankles, so 36 × 48 in or 40 × 50 in is plenty and does not drag on the floor. A throw for the sofa gets pulled up to the shoulders while someone lies down, and that is where 50 × 70 in or 60 × 72 in earns its extra length.

The batting jump at 50 × 60 in

Batting is cut 4 in bigger than the top on every side. A 50 × 60 in top needs 58 × 68 in, which is just too long for a throw package (60 × 60 in), so the calculator picks a twin package (72 × 90 in). That leaves a good piece over.

If you want to use a throw package, keep the top at 52 × 52 in or smaller. A 40 × 50 in lap quilt needs 48 × 58 in of batting and fits a throw package with room to spare. The quilt batting sizes page lists every package and the largest top each one covers.

Backing that wastes little

For the 50 × 60 in quilt the backing is 58 × 68 in. Two widths of 42 in cotton, each 58 in long, cover it: 3¼ yd with one seam. Turning the seam the other way would need two 68 in panels, which is more fabric, so the calculator picks the shorter one.

A 60 × 72 in throw gives backing 68 × 80 in, and the same two panels, 68 in long, make 3⅞ yd. If the backing is a directional print, check that the panels run the way you want before you cut. The quilt backing calculator handles wider fabrics too.

Binding

Binding is the edge of the quilt plus 12 in. For 50 × 60 in that is 2 × (50 + 60) + 12 = 232 in, or 6 strips of 2½ in fabric, ½ yd. The quilt binding calculator works out other widths.

Quick lap quilts and blankets

Because a lap quilt is small, it suits big blocks and a fast layout, such as a rail fence. If you want a throw with no sewing at all, a fleece tie blanket uses the same 50 × 60 in center.

Questions

What size is a lap quilt?

Most charts give 50 × 60 in for a lap or throw quilt. Smaller lap quilts run 36 × 48 in or 40 × 50 in.

Is a lap quilt the same as a throw?

In most charts, yes. Both are listed at 50 × 60 in, though a throw for a long sofa can be made longer.

How much backing does a 50 × 60 in quilt need?

3¼ yd of 42 in fabric: two panels 58 in long, sewn side by side.

What batting fits a lap quilt?

For 50 × 60 in, a twin package. A throw package (60 × 60 in) covers tops up to 52 × 52 in.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.