Skip to content
broiderer

Quilt blocks

Rail fence quilt

Type the finished block size and choose a quilt size. You get the strip size to cut, the number of blocks and the yardage for the Dark, Medium and Light fabrics.

Published Nov 11, 2026

Your numbers

runs in your browser, nothing is saved

Rail fence, 9 in finished
3 pieces per block
Unfinished block9½ in
Grid unit3 in finished, 3½ in cut
Queen quilt110 blocks (10 × 11), 90 × 99 in
Dark fabric2¾ yd
Medium fabric2¾ yd
Light fabric2¾ yd

Traditional block. Drawing and cutting chart by broiderer.com; yardage is an estimate, rounded up.

FabricCutSizeWhat it is
Dark13½ × 9½ inrectangle
Medium13½ × 9½ inrectangle
Light13½ × 9½ inrectangle

Worked example

  1. The block sits on a 3 × 3 grid: 9 ÷ 3 = 3 in per unit
  2. Plain squares are cut 3 + ½ = 3½ in
  3. Sewn together the block measures 9½ in square, 9 in once it is in the quilt
  4. Queen: 90 ÷ 9 ≈ 10 blocks across, 95 ÷ 9 ≈ 11 down

Blocks side by side

Rail fence cutting chart at 4 sizes

FabricPiece4½ in block6 in block7½ in block9 in block
Dark1 × rectangle2 × 5 in2½ × 6½ in3 × 8 in3½ × 9½ in
Medium1 × rectangle2 × 5 in2½ × 6½ in3 × 8 in3½ × 9½ in
Light1 × rectangle2 × 5 in2½ × 6½ in3 × 8 in3½ × 9½ in

Blocks and yardage by quilt size (9 in blocks)

QuiltBlocksFinishedFabric
Crib24 (4 × 6)36 × 54 inDark ⅝ yd, Medium ⅝ yd, Light ⅝ yd
Lap42 (6 × 7)54 × 63 inDark 1⅛ yd, Medium 1⅛ yd, Light 1⅛ yd
Twin80 (8 × 10)72 × 90 inDark 2 yd, Medium 2 yd, Light 2 yd
Queen110 (10 × 11)90 × 99 inDark 2¾ yd, Medium 2¾ yd, Light 2¾ yd
King132 (12 × 11)108 × 99 inDark 3¼ yd, Medium 3¼ yd, Light 3¼ yd

Three strips make a block

A rail fence block is three strips of equal width sewn side by side into a square. In our drawing the strips run Dark, Medium, Light. For a 9 in block each strip is cut 3½ × 9½ in and finishes 3 in wide, so three of them make 9 in.

Because the block divides by three, the easy sizes are multiples of 1½ in: 4½, 6, 7½ and 9 in, as in the cutting chart.

Strip piecing the whole quilt

Nobody cuts 330 separate rectangles for a queen. Cut 3½ in strips across the width of each fabric, sew them into strip sets of Dark, Medium and Light, and cut the sets into 9½ in squares. A strip set made from strips cut across the full width of fabric gives four 9½ in blocks, so a queen of 110 blocks needs 28 strip sets, which matches the 2¾ yd of each fabric the calculator gives.

Press all the seams in a strip set toward the Dark strip. Measure the sewn strip set: it should be 9½ in wide. If it comes up short, your seams are wide, and the squares you cut from it will not be square. The seam allowance page explains the scant ¼ in.

How it looks in a quilt

The pattern comes from turning the blocks. In the quilt view on this page every other block is rotated a quarter turn, so the strips run across in one block and up and down in the next. The Dark strips of neighboring blocks meet end to side and form a zigzag that steps across the quilt.

Lay all the blocks out on a floor or design wall before you sew rows. The zigzag only works if every block keeps the Dark strip on the same side before rotating, so a block flipped the wrong way shows at once.

Variations

Use four or five narrower strips per block for a busier fence, make every strip set from different scraps, or grade the colors from dark to light across more strips. If you set all the blocks the same way instead of rotating them, the strips line up into long stripes.

Small rail fence blocks, 4½ or 6 in, also make a quick pieced border; the border calculator helps fit them.

Related blocks and quilts

The rail fence is strip piecing at its simplest, and the same skill builds the rows of a nine patch and the logs of a log cabin. The bargello quilt takes strip sets further, cutting them into narrow segments that are shifted to make waves. A queen rail fence at 9 in blocks finishes 90 × 99 in, 10 blocks across and 11 down.

Questions

How many blocks are in a queen rail fence quilt?

With 9 in blocks, 110: 10 across and 11 down, for a 90 × 99 in top.

Why are all three fabric amounts the same?

Each block uses one strip of each fabric, all the same size, so the Dark, Medium and Light yardage always match.

Do I need three fabrics for a rail fence?

The block on this page uses three, but two fabrics or many scraps work too. Keep clear contrast between neighbors so the zigzag shows.

What size strips do I cut for a 6 in rail fence block?

Cut 2½ in strips and cross-cut the sewn strip set into 6½ in squares.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

Traditional block. Drawing and cutting chart by broiderer.com.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.