Skip to content
broiderer

Blankets

Blanket Size Chart

Pick a blanket size and the fabric you plan to sew it from. You get the size in inches and centimeters, the yardage for one layer and the length of edge you will bind or stitch.

Published Nov 17, 2026

Your numbers

runs in your browser, nothing is saved

Throw
50 × 60 in
Used forsofa, most common throw
In centimeters127 × 152 cm
Fabric per layer1¾ yd of fleece
Edge to finish220 in

Typical sizes; brands differ by a few inches. Fabric is an estimate, rounded up to the next ⅛ yard.

Worked example

  1. Throw: 50 × 60 in, a typical size; brands vary by a few inches
  2. Fleece is about 58 in usable: 1 panel of 62 in
  3. Edge: 2 × (50 + 60) = 220 in

Blanket sizes

BlanketSize (in)CentimetersUsed for
Lovey or security blanket12 × 1230 × 30a small square to hold
Stroller30 × 3676 × 91stroller or car seat, over the knees
Receiving40 × 40102 × 102square, 36 to 40 in
Swaddle44 × 44112 × 112square, 44 to 48 in
Lap blanket36 × 4891 × 122over the knees in a chair
Crib blanket45 × 60114 × 152toddler bed or crib-size
Throw50 × 60127 × 152sofa, most common throw
Twin66 × 90168 × 229twin and twin XL beds
Full (double)80 × 90203 × 229full beds
Queen90 × 90229 × 229queen beds; 90 × 100 in is also sold
King108 × 90274 × 229king beds; 108 × 100 in is also sold
California king104 × 108264 × 274California king beds

Typical sizes. Twin blankets run 65 to 66 × 90 in, full 80 to 85 × 90, queen and king 90 to 100 in long.

Blanket or quilt? The same beds compared

BedMattressBlanketQuilt (15 in drop)
Twin38 × 75 in66 × 90 in68 × 90 in
Full54 × 75 in80 × 90 in84 × 90 in
Queen60 × 80 in90 × 90 in90 × 95 in
King76 × 80 in108 × 90 in106 × 95 in

Blankets sit under a quilt or comforter and are tucked in, so they are often shorter.

How to read the chart

The sizes in the table are the ones you will see on store labels, and they are typical rather than fixed. Brands move a few inches either way: twin blankets run 65 to 66 × 90 in, full blankets 80 to 85 × 90 in, and queen and king blankets anywhere from 90 to 100 in long. When you sew your own, any number inside those ranges is fair.

For a bed, a better answer comes from your own mattress. The bed pages start from the mattress size and the drop you want: twin, full, queen and king.

Small sizes, from lovey to crib

The top of the table runs from a 12 in lovey through the 30 × 36 in stroller size, the 36 to 40 in receiving squares and the 44 to 48 in swaddle squares, up to the 45 × 60 in crib size. The baby blanket size page works out the fabric for each one. These are sizes only: the American Academy of Pediatrics says nothing should be in the crib but a fitted sheet for babies under 12 months, so no quilts or blankets.

Between the baby sizes and the beds sit the two sofa sizes: the 36 × 48 in lap blanket and the 50 × 60 in throw, which is the size most stores sell.

Blanket or quilt: why the numbers differ

A quilt is three layers, a top, batting and a backing, held together by the quilting stitches. A blanket is usually one or two layers of fleece, flannel or knitted fabric. On a made bed the blanket goes over the flat sheet and under the comforter or quilt, and its sides are often tucked under the mattress, so it does not have to hang as far.

That is why the second table puts the blanket a little smaller than the quilt for the same bed: 80 × 90 in against 84 × 90 in on a full, and 90 × 90 in against 90 × 95 in on a queen. For the quilt sizes, start at the quilt size chart.

Fabric: the worked example

Fleece is sold 58 to 60 in wide, and the calculator counts 58 in as usable. A 50 in wide throw fits across one width, so you only buy the length plus 2 in to square the cut ends: 62 in, rounded up to the next ⅛ yard, is 1¾ yd.

Anything wider than the fabric needs panels joined with ½ in seams. The calculator tries the seam both ways, along the length and across the width, and keeps the one that uses less fabric. With 42 in flannel you need more panels than with fleece, and 108 in wide backing fabric covers a queen in a single piece.

The edge to finish

The last line of the answer is the distance around the blanket, 2 × (width + length). For the throw that is 220 in, a little over 6 yd. A king at 108 × 90 in has 396 in of edge, 11 yd, which is worth knowing before you buy binding or wind a bobbin.

Fleece does not fray, so a single layer can be left with a raw edge, finished with blanket stitch, or bound. Flannel and cotton edges need a hem or binding.

Questions

What are the standard blanket sizes?

Typical sizes are 50 × 60 in for a throw, 66 × 90 in for a twin, 80 × 90 in for a full, 90 × 90 or 90 × 100 in for a queen, 108 × 90 or 108 × 100 in for a king and 104 × 108 in for a California king.

What size is a throw blanket?

The common size is 50 × 60 in. Larger throws of 52 × 60 in and 60 × 72 in are also sold.

Does a twin blanket fit a twin XL bed?

Yes. A 66 × 90 in twin blanket is sold for both twin and twin XL beds.

Is a queen blanket the same size as a queen quilt?

Usually not. A queen blanket is about 90 × 90 in because it tucks under the top layer, while quilting charts give a queen quilt as 90 × 95 in.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.