Skip to content
broiderer

Blankets

Throw Blanket Size

Type the width and length of the throw, the fabric, and your knit or crochet gauge if you are making it with yarn. You get the fabric per layer, the edge length, the stitch and row counts and the size in centimeters.

Published Nov 20, 2026

Your numbers

runs in your browser, nothing is saved

Blanket
50 × 60 in
Fabric per layer1¾ yd (one piece)
Edge to finish220 in
Knit or crochet175 stitches × 120 rows
In centimeters127 × 152 cm

Typical sizes; brands differ by a few inches. Fabric is an estimate, rounded up to the next ⅛ yard.

Worked example

  1. Fleece: about 58 in usable, so 1 panel 62 in long = 1¾ yd
  2. Edge: 2 × (50 + 60) = 220 in
  3. Stitches: 50 in × 14 ÷ 4 = 175; rows: 60 × 8 ÷ 4 = 120
  4. Measure your own swatch: gauge is the number that changes most from person to person

Throw sizes and where they fit

ThrowSizeCovers
Lap blanket36 × 48 inknees and lap, sitting
Standard throw50 × 60 inone person on a sofa
Throw52 × 60 inone person, a little wider
Large throw60 × 72 inone person lying down, or two sitting
Twin blanket66 × 90 inthe top of a twin bed

The 50 × 60 in throw is the size most stores sell. Brands vary by a few inches.

Fabric for a throw (one layer)

ThrowFleece (58 in)Flannel (42 in)
36 × 48 in1⅛ yd1½ yd
50 × 60 in1¾ yd3 yd, pieced
52 × 60 in1¾ yd3 yd, pieced
60 × 72 in3½ yd3½ yd, pieced

Which throw for which spot

Throws are the blankets that live off the bed, and the size depends on how they get used. A 36 × 48 in throw covers the knees of someone sitting in a chair. The 50 × 60 in standard covers one person on a sofa from shoulders to feet. A 52 × 60 in throw is the same idea a little wider, and the large 60 × 72 in throw is big enough to stretch out under or for two people sharing a sofa.

Past that you are into bed sizes: a 66 × 90 in twin blanket covers the top of a twin bed. Most stores stock the 50 × 60 in size, and brands drift a few inches either side of it.

The 60 inch problem with fleece

Fleece is about 58 in usable, and that one number explains the jump in the fabric table. The 36, 50 and 52 in widths all fit inside one width, so each is a single piece with 2 in added to square the ends. A 60 × 72 in throw is 2 in too wide, so it needs two panels and 3½ yd, double what a 50 × 60 in takes.

Make the large throw 58 × 72 in instead and it fits one width again: one piece cut 74 in long is 2⅛ yd, with no seam. Nobody will miss the 2 in.

Flannel throws are pieced

With 42 in flannel only the 36 × 48 in throw fits in one piece, at 1½ yd. Every larger throw needs two panels, which is why the flannel column reads 3 yd, pieced, for the standard size. Place the seam in the center or use a wider strip in the middle and narrow strips at the sides, so it looks planned. Wash flannel before cutting it.

Knit or crochet: stitches from your gauge

For a knit or crochet throw the calculator multiplies the size by your gauge. At 14 stitches and 8 rows in 4 in, the 50 × 60 in throw is 50 × 14 ÷ 4 = 175 stitches across and 60 × 8 ÷ 4 = 120 rows. The large 60 × 72 in throw at the same gauge is 210 stitches and 144 rows.

The gauge numbers are examples. Work a swatch in your own yarn and hook or needles and type in what you measure; the knitting gauge calculator shows how to count it, and the crochet blanket size chart adds the chain and turning stitches.

Edges and related sizes

The standard throw has 220 in of edge to bind or stitch. If 50 × 60 in is the size you want, the 50 × 60 blanket page works it out five ways, from tie blanket to quilt. For a smaller cover sized to one person in a chair, see the lap blanket size.

Questions

What is the standard size of a throw blanket?

50 × 60 in is the size most stores sell. Throws also come at 52 × 60 in and as large throws of 60 × 72 in.

Is a throw smaller than a twin blanket?

Yes. A standard throw is 50 × 60 in and a twin blanket is 66 × 90 in, big enough to cover the top of a twin bed.

How many stitches for a throw blanket?

Width times stitches per inch. With 14 stitches over 4 in, that is 3.5 per inch, so 50 in needs 175 across.

How much fleece do I need for a throw?

1¾ yd of 58 in fleece for a 50 × 60 in throw, one piece. A 60 × 72 in throw needs two panels and 3½ yd.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.