Blankets
Queen Size Blanket
Type how far the blanket should come down each side of a queen bed and how much you tuck in at the foot. You get the blanket size, the nearest store size, the fabric per layer, how the panels join and the edge length.
Published Nov 18, 2026
Worked example
- Width = mattress 60 in + 2 × 12 in drop = 84 in
- Length = mattress 80 in + 8 in at the foot = 88 in (a blanket stops at the pillows)
- Fleece is about 58 in usable: 2 panels with ½ in seams, each 86 in long (2 in extra to square the ends)
- Edge: 2 × (84 + 88) = 344 in of binding, blanket stitch or fringe
Queen blanket at different drops
| Drop each side | Foot 0 in (top of bed only) | Foot 8 in (tucked) | Foot 15 in (hanging) |
|---|---|---|---|
| 6 in | 72 × 80 in | 72 × 88 in | 72 × 95 in |
| 8 in | 76 × 80 in | 76 × 88 in | 76 × 95 in |
| 10 in | 80 × 80 in | 80 × 88 in | 80 × 95 in |
| 12 in | 84 × 80 in | 84 × 88 in | 84 × 95 in |
| 15 in | 90 × 80 in | 90 × 88 in | 90 × 95 in |
Fabric for a queen blanket (90 × 90 in, one layer)
| Fabric | To buy | Panels |
|---|---|---|
| Fleece, 58 to 60 in wide | 5⅛ yd per layer | 2 panels, 1 seam along the length |
| Flannel or quilting cotton, 42 in | 7¾ yd per layer | 3 panels, 2 seams along the length |
| Wide backing fabric, 108 in | 2⅝ yd per layer | one piece, no seams |
Two-layer blankets need the same again for the back. Prewash flannel and cotton first; fleece does not need it.
The bed most couples share
Queen is the most popular mattress size in the US, and most of the time two people sleep in it. Each gets 30 in of a 60 × 80 in mattress, so a queen blanket gets pulled from both sides all night. A blanket that only just reaches the mattress edge ends up showing the sheet on one side by morning. That is the reason the example uses a 12 in drop on each side, which gives 84 in across.
The length works differently. A blanket stops at the pillows, so the example adds only the foot: 80 in plus 8 in to tuck under gives 88 in.
Mattress depth and the tuck
Standard mattresses are about 10 to 12 in deep, and thick ones start at 12 in and go past 14 in. If you like the sides tucked in, the drop has to cover the depth and then some. A 12 in deep queen with 3 in folded under needs a 15 in drop, and the drop table shows what that does: 90 in across, which is the width of a store-bought queen blanket.
If the blanket lies on top of the bed and never gets tucked, a smaller drop is fine. Under a heavy comforter, 8 in on each side (76 in across) keeps the blanket from bunching at the edges.
Where the fleece seam goes
An 84 in width is more than one 58 in width of fleece, so the blanket needs two panels. For this size the calculator turns them sideways: each panel is cut 86 in long across the bolt, and the two are stacked head to foot with one seam running across the bed. That uses 4⅞ yd per layer, a little less than running the seam lengthwise.
You decide where that seam falls. Cut each panel 44½ in deep and it lands in the middle, 44 in from each end. Or keep one panel full width at the head and put a narrower one at the foot, where the seam ends up tucked under the mattress.
Sewing the store size instead
To copy a 90 × 90 in queen blanket, the fabric table gives 5⅛ yd of fleece with one seam, 7¾ yd of 42 in flannel in three panels, or 2⅝ yd of 108 in wide backing with no seam at all. A second layer for the back takes the same again.
Flannel and cotton should be washed before cutting; fleece does not need it. Measure a washed swatch with the fabric shrinkage calculator if you want the exact amount to add.
Finishing 344 inches of edge
Around an 84 × 88 in blanket there are 344 in of edge, 9.6 yd. On fleece you can leave it raw, work blanket stitch or add binding; on flannel, bind it. The quilt binding calculator turns that edge into strips. If you want the bed covered to the floor instead, the queen quilt size page plans the top layer.
Questions
What size is a queen blanket?
Store queen blankets are usually 90 × 90 in, and 90 × 100 in is also sold. Sewn for a 60 × 80 in mattress with a 12 in drop and an 8 in foot tuck, it comes to 84 × 88 in.
How much fleece do I need for a queen blanket?
About 4⅞ yd per layer for 84 × 88 in, or 5⅛ yd for a 90 × 90 in blanket, both with one seam. Double it for two layers.
Can I use a king blanket on a queen bed?
Yes. A 108 in wide king blanket hangs 24 in past each side of a queen, so fold or tuck the extra under the mattress.
Should a queen blanket be smaller than the comforter?
Usually it is. The blanket sits under the comforter or quilt and is tucked in, so it does not need to hang as far as the top layer.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.