Quilt calculators
Fabric yardage calculator
Type the cut size of one piece, how many you need and the usable width of your fabric. You get the yardage to buy, the strips to cut, how many pieces each strip holds and how many spares you will have.
Published Nov 1, 2026
Worked example
- Cut strips 8½ in tall across the 42 in width
- Each strip holds 42 ÷ 4½ = 9 pieces
- 24 ÷ 9 = 3 strips × 8½ in = 25½ in
- 25½ ÷ 36 = 0.71 yd, rounded up to ¾ yd
Squares from one yard of 42 in fabric
| Cut square | Per strip | Strips in a yard | Squares per yard |
|---|---|---|---|
| 2½ in | 16 | 14 | 224 |
| 3 in | 14 | 12 | 168 |
| 3½ in | 12 | 10 | 120 |
| 4½ in | 9 | 8 | 72 |
| 5 in | 8 | 7 | 56 |
| 6½ in | 6 | 5 | 30 |
| 8½ in | 4 | 4 | 16 |
| 10 in | 4 | 3 | 12 |
| 12½ in | 3 | 2 | 6 |
2½ in strips from common cuts
| Cut | Size | 2½ in strips |
|---|---|---|
| ¼ yd | 9 × 42 in | 3 |
| ⅓ yd | 12 × 42 in | 4 |
| ½ yd | 18 × 42 in | 7 |
| 1 yd | 36 × 42 in | 14 |
| Fat quarter | 18 × 21 in | 7 short (21 in) |
Think in strips, not in square inches
Adding up the area of every piece and dividing by the area of a yard looks tidy, but it usually comes out short, because pieces have to be cut from straight strips and the end of each strip is wasted. Quilters cut a strip across the width of fabric, then cut it into pieces. The calculator follows that same order: one strip 8½ in tall holds 9 pieces 4½ in wide, three strips cover 24 pieces, and 25½ in of fabric rounds up to ¾ yd.
Rounding always goes up to the next ⅛ yd. The three spare pieces are a small cushion for a cutting mistake.
Which way to turn the piece
A rectangle can be cut from strips as tall as its long side or as tall as its short side. Turned the other way, the same 4½ × 8½ in piece comes from strips 4½ in tall that hold only 4 pieces each, with 8 in thrown away at the end of every strip. That takes 6 strips, 27 in of fabric. Here both ways land on ¾ yd, but with more pieces the extra waste starts to cost a whole ⅛ yd or more.
Turn a piece only if the print allows it. Stripes and one-way designs fix the direction, and so does a pattern that asks for the long side on the straight grain.
The width you type changes the answer
Bolts of quilting cotton are labeled 42 to 44 in, but after the selvages come off you can count on 40 to 42 in. At 40 in, a strip holds only 8 pieces of 4½ in instead of 9. The 24 pieces in the example still fit in 3 strips, but a count of 27 would not. When the fabric is in front of you, measure it. When you are buying online, type 40 to be safe.
Wider apparel and home decor cloth, often 54 or 60 in, holds more per strip. See fabric widths for the usual numbers.
Squares and strips from cuts you already own
The two tables above go the other way: from fabric to pieces. They help when you are working from your stash. A ½ yd cut gives seven 2½ in strips, a fat quarter gives seven shorter ones of 21 in. A fat quarter and a ¼ yd cut hold the same area but cut very differently, so check the shape before you plan; the fat quarter calculator handles that case.
Adding a margin
Many cotton fabrics draw up a little in the first wash, and the amount varies, so if you prewash, test a swatch and add a few inches. Also leave room to straighten the cut edge before the first strip. For triangles, use the half-square triangle calculator instead, since a triangle starts from a larger square.
Questions
How many 2½ in squares are in a yard of fabric?
224 from a yard of 42 in fabric: 14 strips with 16 squares each.
How many 5 in squares can I cut from one yard?
56. A yard gives 7 strips of 5 in, and each 42 in strip holds 8 squares.
Should I buy extra fabric?
The calculator already rounds up to the next ⅛ yd. Add a little more if you plan to prewash or if you are new to rotary cutting.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.