Skip to content
broiderer

Quilt calculators

Quilt border calculator

Type the size of your quilt top before borders, the finished border width and your usable fabric width. You get the strips to cut, the yardage for joined strips or one-piece lengthwise strips, and the size of the finished quilt.

Published Nov 1, 2026

Your numbers

runs in your browser, nothing is saved

Border fabric (strips across the width, joined)
1½ yd
Strips to cut8 × 6½ in
Or cut lengthwise, no joins2⅛ yd
Finished quilt72 × 84 in

Measure the quilt through the middle, not along the edges, and cut the borders to that number. It keeps the edges from waving.

Estimates. Usable fabric width, shrinkage and cutting errors vary; we round up to the next ⅛ yard. Check your pattern if you follow one.

Worked example

  1. Cut width = border 6 in + ½ in for two seams = 6½ in
  2. Side borders: 2 × 72 in; top and bottom: 2 × (60 + 12) = 2 × 72 in
  3. Total 288 in + 10 in for joins = 298 in ÷ 42 in = 8 strips
  4. 8 × 6½ in = 52 in = 1½ yd

Border fabric for a 60 × 72 in top (42 in fabric)

Finished borderCut stripsJoined stripsLengthwise cutFinished quilt
2 in7 × 2½ in½ yd2⅛ yd64 × 76 in
3 in7 × 3½ in¾ yd2⅛ yd66 × 78 in
4 in7 × 4½ in⅞ yd2⅛ yd68 × 80 in
5 in7 × 5½ in1⅛ yd2⅛ yd70 × 82 in
6 in8 × 6½ in1½ yd2⅛ yd72 × 84 in
8 in8 × 8½ in2 yd2¼ yd76 × 88 in
10 in8 × 10½ in2⅜ yd2⅜ yd80 × 92 in

How the border math works

A border strip is cut ½ in wider than it will finish, because it has a seam on both long edges. The side borders match the length of the top. The top and bottom borders then cover the width of the top plus the two side borders, which is why a 60 in wide top with 6 in borders needs top and bottom strips of 72 in. Add the joins, divide by the fabric width and round up: 8 strips of 6½ in, 1½ yd.

For a smaller border the count drops. A 4 in border on the same top needs 2 × 72 in for the sides and 2 × 68 in for the top and bottom, 280 in in all. With 10 in for joins that is 290 in, or 7 strips of 4½ in: ⅞ yd.

Measure through the middle

The edges of a pieced top stretch while you sew and press, and the middle stays truer. If you cut borders to match the edges, you sew that extra length back on and the border ripples. Lay the top flat, measure through the center from top to bottom, and cut both side borders to that number. Sew them on, then measure across the center again, borders included, for the top and bottom strips.

Pin from the middle of each strip outward, easing any fullness in the edge of the top. A small difference disappears in quilting. A difference of an inch or more usually means the blocks are not the same size, and it is worth checking them before you go on.

Joined strips or one long cut

Cutting across the width of fabric and joining strips uses the least yardage, and a diagonal join hides well in a busy print. Cutting along the length gives each border in one piece with no seams, and the lengthwise grain stretches the least, which helps on a large quilt. The cost is length: you need enough yardage to cover the longest border, so the lengthwise column stays at 2⅛ yd for every border up to 6 in and then climbs only slowly.

Stripes, large florals and anything with a clear direction look best cut lengthwise. Leftover width from a lengthwise cut is good for binding.

Two or more borders

Work one border at a time. A 2 in inner border turns a 60 × 72 in top into 64 × 76 in, and that new size goes into the calculator for the outer border. A narrow inner border in a contrasting color can frame the blocks and keep the outer border from blending into them.

Once the last border is on, the finished size is what you use for the quilt backing calculator. If the borders are there to stretch a top to bed size, check the target in the quilt size chart first.

Questions

How wide should a quilt border be?

There is no fixed rule. Lay strips of two or three widths beside the top and pick by eye; the table above shows how each width from 2 to 10 in changes the final size.

Why are my quilt borders wavy?

They were usually cut to the length of the stretched edges. Measure through the center of the quilt and cut the borders to that number.

Do I sew the side borders or the top border first?

The calculator assumes the sides go on first and the top and bottom borders run the full width, side borders included.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.