Quilt calculators
Half square triangle calculator
Type the finished size of your half square triangles, how many you need and the method. You get the size and number of squares to cut from each fabric, the yardage for each color, and the size to trim to.
Published Nov 1, 2026
Worked example
- Cut size = finished 3 + ⅞ = 3⅞ in
- Each light and dark pair makes 2 HSTs: 48 ÷ 2 = 24 pairs
- A 42 in strip holds 10 squares: 3 strips × 3⅞ in = ⅜ yd of each
- Many quilters cut 4 in instead and trim to 3½ in for perfect points
HST cut sizes
| Finished HST | Unfinished | 2 at a time: cut | 8 at a time: cut |
|---|---|---|---|
| 1 in | 1½ in | 1⅞ in | 3¾ in |
| 1½ in | 2 in | 2⅜ in | 4¾ in |
| 2 in | 2½ in | 2⅞ in | 5¾ in |
| 2½ in | 3 in | 3⅜ in | 6¾ in |
| 3 in | 3½ in | 3⅞ in | 7¾ in |
| 3½ in | 4 in | 4⅜ in | 8¾ in |
| 4 in | 4½ in | 4⅞ in | 9¾ in |
| 4½ in | 5 in | 5⅜ in | 10¾ in |
| 5 in | 5½ in | 5⅞ in | 11¾ in |
| 6 in | 6½ in | 6⅞ in | 13¾ in |
Where the ⅞ in comes from
A half square triangle, or HST, is a square made of two right triangles sewn along the diagonal. Finished size means the size once it is sewn into the quilt, with all seam allowances used up. The unit before that is ½ in bigger, so a 3 in finished HST is 3½ in unfinished.
If you started from 3½ in squares and sewed on the diagonal, the diagonal seam would eat into the corners and the unit would come out short. Adding ⅞ in instead of ½ in covers that extra loss. That gives the rule on the calculator: finished + ⅞, so a 3 in finished HST starts from 3⅞ in squares.
Two at a time, step by step
In the example, 48 HSTs need 24 pairs. A 42 in strip holds 10 squares of 3⅞ in, so three strips do it: 3 × 3⅞ in = 11⅝ in, which rounds up to ⅜ yd of each color.
- Draw a diagonal line on the wrong side of the light square.
- Place it right sides together on a dark square of the same size.
- Sew a scant ¼ in on each side of the line.
- Cut on the line. You now have two HSTs.
- Press, then trim to the unfinished size if you cut oversize.
Eight at a time
For a large batch, use one big square of each fabric, double the two-at-a-time size: (finished + ⅞) × 2. Draw both diagonals, sew ¼ in on each side of both lines, then cut the square into quarters straight across and then along the diagonals. Each pair gives 8 HSTs.
Using the same rule for the example: 3 in finished makes (3 + ⅞) × 2 = 7¾ in squares, and 48 ÷ 8 = 6 pairs. It is fast, but every outer edge of the finished units is on the bias, so handle them gently.
Cut oversize and trim
The ⅞ in rule gives exact units only if your cutting and your seam are perfect. Many quilters add a little, cutting 4 in squares for a 3 in HST, and then trim each unit to 3½ in with the ruler's diagonal line on the seam. It takes longer, but the points come out sharp and the blocks fit together. The diagonal seam is on the true bias, the stretchiest direction in a woven fabric, so press with an up-and-down motion rather than pushing the iron along the seam.
Many quilters press the seam toward the darker fabric so it does not show through. Others press it open to reduce bulk where many points meet.
What to make with them
Four HSTs turned in a ring make a pinwheel block, and they form the points of many star blocks. If your pattern also needs geese units, the flying geese calculator uses the same kind of add-on math.
Questions
What size square do I cut for a 3 in half square triangle?
3⅞ in for the two-at-a-time method, or 4 in if you want to trim to 3½ in afterwards.
How do I find the cut size for any HST?
Add ⅞ in to the finished size for two at a time. For eight at a time, double that number.
What is the difference between finished and unfinished size?
The unfinished size includes the seam allowances and is ½ in larger. A 3 in finished HST measures 3½ in before it is sewn into a block.
Why are my half square triangles too small?
Usually the seam is a little wide, or the bias edges stretched while pressing. Cut slightly oversize and trim.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.