Skip to content
broiderer

Quilt blocks

Sawtooth star quilt pattern

Type the finished block size and choose a quilt size. You get the squares to cut for the corners, center and flying geese, the block count and the yardage for each fabric.

Published Nov 13, 2026

Your numbers

runs in your browser, nothing is saved

Sawtooth star, 12 in finished
10 pieces per block
Unfinished block12½ in
Grid unit3 in finished, 3½ in cut
Queen quilt64 blocks (8 × 8), 96 × 96 in
Background fabric4⅞ yd
Center fabric2 yd
Star points fabric2⅞ yd

Traditional block. Drawing and cutting chart by broiderer.com; yardage is an estimate, rounded up.

FabricCutSizeWhat it is
Background43½ insquare
Center16½ insquare
Background17¼ inlarge square for flying geese (4 units)
Star points43⅞ insmall square for flying geese

Worked example

  1. The block sits on a 4 × 4 grid: 12 ÷ 4 = 3 in per unit
  2. Plain squares are cut 3 + ½ = 3½ in; geese squares 7¼ and 3⅞ in
  3. Sewn together the block measures 12½ in square, 12 in once it is in the quilt
  4. Queen: 90 ÷ 12 ≈ 8 blocks across, 95 ÷ 12 ≈ 8 down

Blocks side by side

Sawtooth star cutting chart at 4 sizes

FabricPiece4 in block6 in block8 in block12 in block
Background4 × square1½ in2 in2½ in3½ in
Center1 × square2½ in3½ in4½ in6½ in
Background1 × large square for flying geese (4 units)3¼ in4¼ in5¼ in7¼ in
Star points4 × small square for flying geese1⅞ in2⅜ in2⅞ in3⅞ in

Blocks and yardage by quilt size (12 in blocks)

QuiltBlocksFinishedFabric
Crib12 (3 × 4)36 × 48 inBackground 1 yd, Center ⅜ yd, Star points ⅝ yd
Lap20 (4 × 5)48 × 60 inBackground 1½ yd, Center ¾ yd, Star points ⅞ yd
Twin48 (6 × 8)72 × 96 inBackground 3⅝ yd, Center 1½ yd, Star points 2¼ yd
Queen64 (8 × 8)96 × 96 inBackground 4⅞ yd, Center 2 yd, Star points 2⅞ yd
King72 (9 × 8)108 × 96 inBackground 5⅜ yd, Center 2¼ yd, Star points 3⅛ yd

How the sawtooth star is built

The sawtooth star sits on a 4 × 4 grid. In our drawing the four corners are Background squares, the big middle square is the Center (it takes up four grid cells), and each side is a flying geese unit. The large triangle of each goose is Background and points in toward the Center, while the two small triangles beside it are the Star points. Together the small triangles make eight sharp points around a big square center.

For a 12 in block that means four 3½ in Background squares, one 6½ in Center square and four flying geese units that measure 3½ × 6½ in before sewing.

Four flying geese from one square

The cutting list uses the no-waste method: one 7¼ in Background square and four 3⅞ in Star points squares make all four geese. Place two small squares on opposite corners of the large one, right sides together, draw a line corner to corner through both, and sew ¼ in on each side. Cut on the line, press the small triangles out, add a small square to the corner of each piece, sew and cut again. The flying geese calculator explains the method for any size and gives an oversize option if you like to trim.

Check each goose: it should be 3½ × 6½ in, with the tip of the Background triangle sitting ¼ in in from the raw edge so it survives the seam.

Sewing order and pressing

Sew the block in three rows. Top and bottom rows: corner square, goose, corner square, with the goose tip pointing toward the Center. Middle row: goose, Center, goose, with these two geese turned on their sides. Each row should measure 12½ in long.

Press the top and bottom rows toward the corner squares and the middle row toward the Center, so the seams nest. When you sew a goose to its neighbor, keep the goose on top so you can see where its seams cross and stitch right through that point.

How it looks in a quilt

The block's outer edges are almost all Background, so stars set side by side stay separate, each one framed by the merged corner squares of its neighbors. The quilt view on this page shows that even spacing. Big centers make the sawtooth star a good block for showing off a large print, and the plain Background around each star leaves room for quilting.

Variations and related blocks

A star in a star is the classic upgrade: a 6 in sawtooth star, which measures 6½ in unfinished, drops right into the space of the 6½ in Center square of a 12 in star. Use the 6 in column of the cutting chart for the small star. Scrappy Star points, a fussy-cut center, or a Center fabric that matches the points are all common changes.

Compare the Ohio star, which makes its points with hourglass units on a 3 × 3 grid, and the friendship star. A queen of 64 sawtooth stars takes 4⅞ yd of Background, 2 yd of Center and 2⅞ yd of Star points.

Questions

Why is the Center square cut 6½ in on a 12 in block?

The center covers two grid cells each way. Each cell finishes 3 in, so the center finishes 6 in and is cut ½ in larger.

My star points get cut off. What am I doing wrong?

The seam is usually a little too wide, or the goose is a little short. Check that each goose measures 3½ × 6½ in and sew right through the point where its seams cross.

Can I make the flying geese one at a time instead?

Yes, but the method on this page makes four identical geese from five squares with no leftover triangles, which is quicker for a full quilt.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

Traditional block. Drawing and cutting chart by broiderer.com.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.