Skip to content
broiderer

Quilt calculators

Flying geese calculator

Type the finished width of the goose (its long side) and how many units you need. You get the size and number of large and small squares, the fabric for goose and sky, and the finished and unfinished unit size.

Published Nov 1, 2026

Your numbers

runs in your browser, nothing is saved

Goose (large) squares
4 at 7¼ in
Sky (small) squares16 at 3⅞ in
Goose fabric¼ yd
Sky fabric¼ yd
Unit size3 × 6 in finished, 3½ × 6½ in unfinished

Estimates. Usable fabric width, shrinkage and cutting errors vary; we round up to the next ⅛ yard. Check your pattern if you follow one.

Worked example

  1. Finished unit 3 × 6 in (twice as wide as tall)
  2. Large square = 6 + 1¼ = 7¼ in; small = 3 + ⅞ = 3⅞ in
  3. One large and four small squares make 4 geese: 16 ÷ 4 = 4 sets
  4. Fabric: 1 strip of 7¼ in and 2 strips of 3⅞ in

No-waste flying geese (4 at a time) cut sizes

Finished unitLarge square4 small squaresUnfinished unit
1 × 2 in3¼ in1⅞ in1½ × 2½ in
1½ × 3 in4¼ in2⅜ in2 × 3½ in
2 × 4 in5¼ in2⅞ in2½ × 4½ in
2½ × 5 in6¼ in3⅜ in3 × 5½ in
3 × 6 in7¼ in3⅞ in3½ × 6½ in
3½ × 7 in8¼ in4⅜ in4 × 7½ in
4 × 8 in9¼ in4⅞ in4½ × 8½ in

How a flying geese unit is built

A flying geese unit is a rectangle twice as wide as it is tall. The goose is the large triangle in the middle, pointing up, and the sky is the two small triangles at its sides. A 6 in wide goose finishes at 3 × 6 in and measures 3½ × 6½ in before it goes into a block.

The no-waste method makes four identical geese at once from one large square of goose fabric and four small squares of sky fabric. The rule is short: large square = finished width + 1¼ in, small squares = finished height + ⅞ in. For the example, 6 + 1¼ = 7¼ in and 3 + ⅞ = 3⅞ in.

Sewing order

  • Draw a diagonal line on the wrong side of all four small squares.
  • Place two small squares on opposite corners of the large square, right sides together. Their inner corners overlap slightly in the middle and the line runs corner to corner.
  • Sew ¼ in on each side of the line, cut on the line and press the small triangles out.
  • On each piece, place one more small square on the corner of the large triangle, sew ¼ in on each side of its line, cut and press.
  • You now have four geese. Check each against the unfinished size.

Working out the fabric

Each set of one large and four small squares makes 4 geese, so 16 geese need 4 sets. A 42 in strip 7¼ in deep holds five large squares, more than the four you need, so one strip covers the goose fabric. The 16 small squares at 3⅞ in fit ten to a strip, so two strips do it. Both colors come to about ¼ yd.

A second example with the same rule: for 12 geese at 4 in wide, you need 3 sets. That is 3 large squares at 4 + 1¼ = 5¼ in and 12 small squares at 2 + ⅞ = 2⅞ in, giving units of 2 × 4 in finished, 2½ × 4½ in unfinished.

Exact or oversize

The 1¼ and ⅞ in add-ons give units that come out exactly right when your cutting and your scant ¼ in seam are accurate. If yours tend to run small, some quilters add 1½ in to the large square and 1 in to the small ones, then trim each goose to size, leaving exactly ¼ in above the goose's point. It costs a few minutes per unit and saves blunt points later.

The diagonal seams run along the bias, which is the stretchiest direction of the weave, so press gently and avoid pulling the units.

Where flying geese go

Four geese around a center square make the points of a sawtooth star. Long rows of geese also make a good pieced border. If your pattern mixes geese with triangle squares, the half square triangle calculator uses the same ⅞ in logic for the small pieces.

Questions

What size squares do I cut for 2 × 4 in flying geese?

One 5¼ in large square and four 2⅞ in small squares make four geese that finish at 2 × 4 in.

How many flying geese does the no-waste method make?

Four from one large square and four small squares.

What is the unfinished size of a flying geese unit?

Add ½ in to both sides of the finished size. A 3 × 6 in finished unit measures 3½ × 6½ in.

Why are my flying geese points cut off?

The seam was likely a little wide or the unit stretched. Cut oversize and trim so ¼ in remains above the point.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.