Quilt calculators
Rag quilt calculator
Type the quilt size you want, the finished size of each square and your seam allowance. You get how many squares to cut for each layer, the cut size, the yardage per layer and the finished size of the quilt.
Published Nov 1, 2026
Worked example
- Cut size = 6 + 2 × ½ seam = 7 in
- 8 across × 10 down = 80 squares
- A 42 in strip holds 6: 14 strips × 7 in = 2¾ yd per layer
- The seam allowances stay on the front and fray into the rag edge after washing
Rag quilt fabric per layer (½ in seams, 42 in fabric)
| Size | Finished square | Squares | Each layer |
|---|---|---|---|
| 36 × 42 in | 6 in | 42 | 1⅜ yd |
| 48 × 60 in | 6 in | 80 | 2¾ yd |
| 48 × 64 in | 8 in | 48 | 3 yd |
| 64 × 80 in | 8 in | 80 | 5 yd |
| 70 × 90 in | 10 in | 63 | 6½ yd |
How a rag quilt is built
A rag quilt is made of small sandwiches. Each square has three layers: a top, a middle of batting or flannel, and a back. The squares are sewn together with the raw edges facing the front, so every seam allowance stands up on the right side. Those allowances get clipped, and the first wash frays them into the soft, shaggy grid that gives the quilt its name. There is no separate binding or quilting step.
Because each square is already layered, you do not buy backing and batting as single big pieces. The calculator gives the same yardage for each of the three layers.
Why the seam is ½ in
On a regular quilt a ¼ in seam hides inside. Here the allowance is the fringe, so it needs to be wider, and ½ in is the allowance most rag quilt instructions give. The square is cut 1 in larger than it finishes, a ½ in seam on each side: a 6 in square is cut at 7 in.
You can type a wider allowance if you want a longer fringe. The cut size grows by twice the change: with 1 in seams, the same 6 in square is cut at 8 in, a 42 in strip holds only 5, and each layer of the 48 × 60 in quilt jumps from 2¾ to 3⅝ yd.
The middle layer
If the middle is batting, cut it 1 to 2 in smaller than the outer squares, so a 5 to 6 in square for a 7 in cut. That keeps the batting out of the seam allowance, so the fringe is only fabric. Then sew an X from corner to corner through each sandwich before you join the squares, so the layers stay together in the wash.
Choosing the fabric
Fabrics that fray well make the best rag, and cotton flannel and homespun are the usual choices. Test a scrap: clip a seam, wash it and see how it looks before you cut a whole quilt. The rounding in the example comes from the squares: 50 in wide does not hold a whole number of 6 in squares, so it rounds to 8 across, 48 in, and 60 in fits 10 down exactly.
Need a quick size target? See the lap quilt size page. For a no-sew fleece version, the tie blanket calculator works the same idea with knots.
Clipping and washing
Clip each seam allowance at short, even intervals, cutting toward the seam but never through the stitching. Then wash and dry the quilt, and the clipped edges open up into the rag.
Questions
How many squares do I need for a rag quilt?
For a 48 × 60 in quilt of 6 in squares, 80 squares per layer, 8 across and 10 down, cut at 7 in.
What size squares are best for a rag quilt?
6, 8 and 10 in finished are the sizes in the table above. Smaller squares mean more fringe and more clipping.
How much fabric do I need for a rag quilt?
About 2¾ yd per layer for a 48 × 60 in quilt of 6 in squares, so three times that for top, middle and back if all three are different.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.