Quilt blocks
Bargello quilt
Type the quilt width and length, how many fabrics you will use, the finished strip height and the average column width. You get the strips and yardage for each color, how many tubes to sew and how many columns to cut.
Published Nov 5, 2026
Worked example
- One tube of 8 strips is 8 × 2 = 16 in tall when finished
- 64 in ÷ 16 = 4 tubes stacked to reach the length
- 40 columns cut 2 in wide use 80 in of tube; a tube gives about 40 in, so 2 tubes per stack
- Each fabric: 8 strips × 2½ in = ⅝ yd
Bargello fabric per color (8 fabrics, 2 in strips, 1½ in columns)
| Quilt | Size | Strips per fabric | Each fabric |
|---|---|---|---|
| Crib | 36 × 64 in | 8 | ⅝ yd |
| Lap | 51 × 64 in | 8 | ⅝ yd |
| Twin | 69 × 96 in | 18 | 1¼ yd |
| Queen | 90 × 96 in | 18 | 1¼ yd |
| King | 106½ × 96 in | 24 | 1¾ yd |
Column widths in a real bargello vary from about 1 to 3 in to shape the curve; the total is what matters for fabric.
How a bargello quilt is built
A bargello quilt is made from long strips sewn into sets, cut crosswise into narrow columns, and then shifted up or down one fabric at a time. The shift is what turns plain stripes into the flowing waves and peaks the quilt is known for. Every strip has the same height; the columns change width, and that change shapes the curve.
The usual method sews each strip set into a tube by joining the first and last strip as well. You cut rings off the tube, then open each ring at a different seam with a seam ripper. Opening one fabric lower than the last column moves the color down a step, one fabric higher moves it up.
Reading the numbers
In the example, 8 fabrics with 2 in finished strips make a tube 16 in tall. The quilt is 64 in long, so 4 tubes are stacked to reach the length. The width comes from the columns: 40 columns at about 1½ in finished is 60 in. Each column is cut 2 in wide to allow for seams, so the 40 columns use 80 in of tube. A tube made from strips cut across the fabric gives about 40 in, which is why each stack needs 2 tubes.
Two tubes across and four stacked makes 8 tubes. Each tube has one strip of every fabric, so each color needs 8 strips cut 2½ in, which is 20 in, rounded up to ⅝ yd.
Column widths and the curve
The average column width matters for fabric, but in the quilt itself the widths vary. As the note under the table says, real bargello columns run from about 1 to 3 in. Narrow columns make a steep climb, wide ones make a slow, flat stretch. Sketch the curve on graph paper first, mark each column's width and step, and label the columns in order before they cut anything. Keep that list next to the cutting mat, because one column out of order breaks the wave.
Choosing and sewing the fabrics
Bargello depends on value. Line the fabrics up from light to dark, or run them through a color family, and the steps read as a smooth movement. Fabrics too close in value blur together. Prints that read as one color from across the room work best.
Accuracy matters more than usual, because a tube has 8 seams and a column has many more after the stacks are joined. Keep a steady ¼ in seam; see seam allowance for why a scant quarter helps. Pressing the seams open cuts bulk and helps the columns lie flat.
For other strip-built quilts, look at the rail fence quilt, which uses the same strip-set idea without the shifting.
Questions
How many fabrics do I need for a bargello quilt?
Eight is a common number and the example uses it. More fabrics give a smoother color change, fewer give bolder steps; the calculator works for any count.
Why is the bargello tube sewn into a loop?
Joining the first and last strip lets you open a ring at any seam. That way every column can start on whichever fabric you need for the next step of the wave.
Does the column width change the yardage?
The total width of all the columns does; the mix of narrow and wide ones does not. That is why the calculator asks for the average column width.
What sizes of bargello quilt does the table cover?
From a 36 × 64 in crib quilt to a 106½ × 96 in king. Once you have the size, use the backing calculator for the back.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
Traditional block. Drawing and cutting chart by broiderer.com.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.