Quilt blocks
Dresden plate quilt pattern
Type the number of blades, the finished plate and center diameters, and how many plates you want. You get the cut blade template, the blade angle, how many blades to cut, the fabric for them and the background square size.
Published Nov 3, 2026
Worked example
- Finished blade length = (16 − 4) ÷ 2 = 6 in
- Each blade spans 360 ÷ 20 = 18.0°; the widths come from the circle at the top and at the center
- Top width 16 × tan(9.0°) = 2½ in; bottom 4 × tan(9.0°) = ⅝ in
- Add ¼ in seams all round. Turn the template top to bottom each cut and a strip gives 19 blades
Dresden plate blade sizes (20 blades, 4 in center, ¼ in seams included)
| Plate diameter | Blade height (cut) | Top width (cut) | Bottom width (cut) | Background block |
|---|---|---|---|---|
| 10 in | 3½ in | 2⅛ in | 1⅛ in | 14½ in |
| 12 in | 4½ in | 2⅜ in | 1⅛ in | 16½ in |
| 14 in | 5½ in | 2¾ in | 1⅛ in | 18½ in |
| 16 in | 6½ in | 3 in | 1⅛ in | 20½ in |
| 18 in | 7½ in | 3⅜ in | 1⅛ in | 22½ in |
| 20 in | 8½ in | 3⅝ in | 1⅛ in | 24½ in |
Blades with a pointed or rounded tip need the top folded or turned; that uses the seam allowance already included at the top.
How the blade template is worked out
A Dresden plate is a ring of wedges, so each blade is a tapered slice of a circle: wide at the outer edge and narrow at the center circle. The calculator first finds the finished blade length, half the difference between plate and center: (16 − 4) ÷ 2 = 6 in. Then it splits the circle by the number of blades. With 20 blades, each covers 18°.
The widths come from that angle: 16 × tan(9°), about 2½ in, at the outer edge and 4 × tan(9°), about ⅝ in, at the center. A ¼ in seam on every side gives the cut template: 6½ in tall, 3 in at the top, 1⅛ in at the bottom. If you draw it yourself, start from a center line and measure half of each width to either side.
Changing the number of blades
Fewer blades make wider wedges and a bolder plate; more blades look finer. Every blade in one plate must use the same template, or the ring will not close flat. The angle is 360° divided by the count: 16 blades gives 22.5° each, 24 gives 15°.
Because the template is tapered, you flip it top to bottom for every other cut along a strip. That is why one 42 in strip gives 19 blades and the 400 blades fit in 22 strips of 6½ in, about 4 yd.
Sewing the blades and the plate
For a pointed tip, fold each blade in half lengthwise, right sides together, and stitch across the wide end with a ¼ in seam. Trim the corner at the fold, turn the tip out, center the seam on the back and press. That fold uses the seam allowance already built into the top of the template.
Join the blades side by side with ¼ in seams, sewing from the outer edge toward the center, and check that the ring lies flat before you add the last seam. Fold the background square into quarters and press to mark the center, pin the plate on using those creases, and appliqué the outer edge by hand or machine. A center circle goes on last and covers the raw inner edges.
Background squares and the quilt layout
Every background square in the table is cut 4½ in larger than the finished plate: 2 in of open space on each side plus seam allowance. Twenty plates set 4 across and 5 down, with sashing between them, makes a classic bed quilt. Set edge to edge without sashing, the corners where four blocks meet become a secondary design.
Once the top is done, use the border calculator and the backing calculator to finish the plan.
A little history
Museum records describe the Dresden Plate as one of the most popular quilt patterns of the 1920s and 1930s in the US. Scrappy plates, with every blade from a different print, remain a good way to use up a pile of scraps.
Questions
How many blades does a Dresden plate have?
The example uses 20, but any count works as long as every blade in the plate comes from the same template. The calculator divides 360° by your number of blades to get the angle.
Why is my Dresden plate not lying flat?
Usually the seams are a little wider or narrower than ¼ in, and 20 small errors add up around the ring. Check one seam with a ruler, keep the same seam on every blade, and press before you join the last two blades.
What size background square do I need?
For the 16 in plate in the example, cut 20½ in squares. The table gives the matching square for plates from 10 to 20 in.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
Traditional block. Drawing and cutting chart by broiderer.com.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.