Skip to content
broiderer

Quilt blocks

Pinwheel quilt block

Type the finished block size and choose a quilt size. You get the squares to cut for the half-square triangles, the block count and the yardage for the Blades and Background fabrics.

Published Nov 9, 2026

Your numbers

runs in your browser, nothing is saved

Pinwheel, 12 in finished
4 pieces per block
Unfinished block12½ in
Grid unit6 in finished, 6½ in cut
Queen quilt64 blocks (8 × 8), 96 × 96 in
Blades fabric4¼ yd
Background fabric4¼ yd

Traditional block. Drawing and cutting chart by broiderer.com; yardage is an estimate, rounded up.

FabricCutSizeWhat it is
Blades26⅞ insquare for HSTs (4 HSTs)
Background26⅞ insquare for HSTs (4 HSTs)

Worked example

  1. The block sits on a 2 × 2 grid: 12 ÷ 2 = 6 in per unit
  2. Plain squares are cut 6 + ½ = 6½ in; HST squares 6 + ⅞ = 6⅞ in
  3. Sewn together the block measures 12½ in square, 12 in once it is in the quilt
  4. Queen: 90 ÷ 12 ≈ 8 blocks across, 95 ÷ 12 ≈ 8 down

Blocks side by side

Pinwheel cutting chart at 4 sizes

FabricPiece4 in block6 in block8 in block12 in block
Blades2 × square for HSTs (4 HSTs)2⅞ in3⅞ in4⅞ in6⅞ in
Background2 × square for HSTs (4 HSTs)2⅞ in3⅞ in4⅞ in6⅞ in

Blocks and yardage by quilt size (12 in blocks)

QuiltBlocksFinishedFabric
Crib12 (3 × 4)36 × 48 inBlades ⅞ yd, Background ⅞ yd
Lap20 (4 × 5)48 × 60 inBlades 1⅜ yd, Background 1⅜ yd
Twin48 (6 × 8)72 × 96 inBlades 3⅛ yd, Background 3⅛ yd
Queen64 (8 × 8)96 × 96 inBlades 4¼ yd, Background 4¼ yd
King72 (9 × 8)108 × 96 inBlades 4⅝ yd, Background 4⅝ yd

Four triangles that spin

The pinwheel is the simplest block on a 2 × 2 grid: four half-square triangles (HSTs), each half Blades and half Background, turned so the Blades triangles chase each other around the center. In our drawing the Blades fabric is the bold color and the Background the pale one.

For a 12 in block each HST finishes 6 in. You cut two 6⅞ in squares of Blades and two of Background, which make the four HSTs.

Making and sewing the block

Pair a Blades and a Background square right sides together, draw the diagonal, sew ¼ in on both sides of the line and cut on it. Press toward the Blades fabric and check that each HST measures 6½ in square. The half-square triangle calculator covers other sizes and the methods that make several HSTs at once.

Lay the four HSTs out so every blade turns the same way. Sew the top two together and the bottom two together, pressing the top pair one way and the bottom pair the other way. Then join the halves, matching the center seam.

Getting a sharp center

All eight triangle points meet in the middle, so the center is where a pinwheel shows its accuracy. Pin straight through the center seam before you sew the last seam, and sew with a steady ¼ in. Pressing that last seam open spreads the bulk and lets the block lie flat. If the center keeps drifting, check your HSTs: one that is a little small or a little crooked will pull the point off.

How it looks in a quilt

Set side by side, the Background triangles where four blocks meet turn into a second pinwheel that spins in the light fabric, as you can see in the quilt view on this page. The top looks busier than the single block suggests, which is part of the charm. If you want each pinwheel to stand on its own, separate the blocks with sashing from the sashing page or alternate them with plain squares.

A queen of 64 blocks at 12 in finishes 96 × 96 in and takes 4¼ yd of each fabric. The two fabrics need the same amount because every block uses the same number of squares from each.

Variations and related blocks

Make every block from a different Blades fabric for a scrappy pinwheel quilt, swap light and dark for half the blocks, or make tiny 4 in pinwheels for a border or cornerstones. Turning the HSTs so the blades face out instead of spinning gives a different block, so always check the layout.

Pinwheels pair well with the friendship star, whose star points also spin, and with the Ohio star.

Questions

How many HSTs are in a pinwheel block?

Four. Two squares of each fabric make exactly four half-square triangles.

What size squares do I cut for a 6 in pinwheel?

Cut 3⅞ in squares. Each HST finishes 3 in, and two across make the 6 in block.

Should I press the center seam open or to the side?

Many quilters press it open because eight points meet there. Pressing to one side also works but leaves a thicker lump in the middle.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

Traditional block. Drawing and cutting chart by broiderer.com.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.