Skip to content
broiderer

Embroidery stitches

Embroidery floss

Pick the number of strands in your needle, the length you cut, what one needleful covered in a test, and the area of your design. You get needlefuls per skein and how many skeins of that color to have on hand.

Published Nov 19, 2026

Your numbers

runs in your browser, nothing is saved

Needlefuls per skein
51 of 2 strands
Your design needs20 needlefuls, 1 skein of that color
One skein6 strands, 8 m (about 8.7 yd)

Worked example

  1. 8 m = 315 in; cut 18 in lengths: 17 pieces of 6 strands
  2. Each piece separates into 6 strands: 17 × 6 ÷ 2 = 51 needlefuls of 2
  3. Test: stitch one needleful and measure what it covers (1 sq in here)
  4. 20 sq in ÷ 1 = 20 needlefuls ÷ 51 = 1 skein

Needlefuls from one 8 m skein

Cut length1 strand2 strands3 strands6 strands
12 in156785226
15 in120604020
18 in102513417
24 in78392613

Embroidery threads compared

ThreadMade asHow it is used
Six-strand floss6 fine strands, loosely twistedseparated: use 1 to 6 strands
Pearl (perle) cottonone twisted, shiny threadused whole; sizes 3, 5, 8, 12 (higher is finer)

Six strands, used apart

A skein of six-strand cotton floss holds six fine strands twisted loosely together, about 8 m (8.7 yd) of it. You almost never stitch with all six at once. You cut a length, pull the strands out one by one, and lay as many as the work calls for side by side before threading the needle.

Pulling them out singly and putting them back together is called stripping. It stops the strands from twisting round each other, so they lie flat and cover better.

Pearl cotton is the other common embroidery thread. It is one shiny twisted thread used whole, sold in sizes 3, 5, 8 and 12, where the higher number is the finer thread. You cannot thin it down, so you change the size instead of the strand count.

Why the calculator counts needlefuls

Stitchers run out of a color one needleful at a time, so that is the unit here. The skein is cut into equal lengths, the scrap at the end is dropped, and each length splits into six strands. Divide by the strands you thread and you have needlefuls.

Thread four strands at 18 in and you get 17 pieces, 17 × 6 ÷ 4 = 25 needlefuls, half the 51 you would get with two strands. Cutting shorter gives more needlefuls but each one does less work. The table above shows how the count moves with both choices.

The one-needleful test

No chart can tell you how much area a needleful covers, because it depends on the stitch, the strands, your stitch length and how tightly you pack the rows. So stitch one needleful on a scrap of the real fabric, in the real stitch, and measure the patch it filled.

Do one test per stitch type. A needleful of outline stitches travels a long way; the same needleful in satin stitch fills a small patch, because most of the thread lies on the back as well as the front. Say three strands cut at 15 in fill ¾ sq in and the shape is 30 sq in: 30 ÷ ¾ = 40 needlefuls, and one skein gives exactly 40, so one skein with nothing to spare. Have a second one ready.

Cut length and common mistakes

About 18 in is the usual length to cut. Every stitch drags the thread through the fabric, so a very long length frays and fuzzes near the eye before you reach the end of it, and it tangles more often.

  • Large areas of one color: 75 sq in at 1 sq in per needleful needs 75 needlefuls, which is 2 skeins of 2-strand needlefuls. Buy both at once.
  • A test done on different fabric: a loose weave or a thicker cloth changes the coverage. Test on what you will stitch.

From floss to stitches

Once you know how many strands you are using, match the needle to them: the eye has to take the floss without fraying it. Hand sewing needle sizes lists the embroidery and tapestry ranges. For counted work, the cross stitch calculator works out the design size and fabric, and embroidery stitches sorts the stitches by what they do.

Questions

How long is a skein of embroidery floss?

A standard skein of six-strand cotton floss is 8 m, about 8.7 yd, of six strands twisted together.

How many strands of floss should I use?

Two or three strands suit most surface embroidery lines. In cross stitch the fabric count decides: 3 strands on 11 count, 2 on 14 and 16 count, 1 or 2 on 18 count.

What is the difference between embroidery floss and pearl cotton?

Floss is six strands that you separate and recombine; pearl cotton is a single twisted thread used whole, chosen by size (3, 5, 8 or 12).

How long should I cut embroidery floss?

About 18 in. Longer lengths wear thin as they pass through the fabric and knot more easily.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.