Embroidery stitches
Lazy daisy stitch
The lazy daisy stitch is a single chain stitch loop that stands on its own, held at the tip by one small tacking stitch. The numbered diagrams below show it step by step, from the first loop to a five-petal flower.
Published Nov 5, 2026
01Come up at 1, where the petal starts, at the center of the flower.
02Go back down in the same hole (1) and leave a loop on top. Bring the needle up at 2, inside the loop where the petal tip will be.
03Pull the thread until the loop lies flat, then go down at 3, just over the loop, to tack it in place.
04Work five petals round one center for a daisy. Each petal is a single, separate chain stitch.
Key:stitches already madethis stepneedle under the fabric (dashed)
How many strands of floss
| Strands | Line it makes |
|---|---|
| 1 strand | very fine lines, lettering, small details |
| 2 strands | fine outlines; the usual choice on 14 count fabric |
| 3 strands | medium lines, most surface embroidery |
| 4 to 6 strands | bold lines and texture; harder to pull through tight weaves |
Six-strand cotton floss comes in skeins of 8 m (about 8.7 yd). Separate the strands one at a time and lay them back together for a smoother line.
What the lazy daisy stitch is used for
Its classic job is the petal. Work five loops round one center and you get the small daisy in step 4. The tack at the tip keeps each loop in place on a tea towel or a pillow cover.
Stitchers also line single loops up at even spacing as a light border, or scatter them in staggered rows as a loose filling.
Thread and needle
Six-strand cotton floss is the usual thread, and the strands table above gives the general rule: fewer strands for a fine line, more for a fat, rounded one. For small flowers, two or three strands give a petal you can see without crowding the center.
Use an embroidery (crewel) needle. It has a sharp point and a long eye made for several strands of floss. Pick the size so the eye takes your strands without fraying them; hand sewing needle sizes explains how the numbers run. A hoop from embroidery hoop sizes keeps each loop flat.
Tension and common mistakes
Most trouble shows up in step 3. Pull the loop too hard before you tack it and the petal collapses into a thin straight line. Leave it too loose and it flops or snags.
- Coming up outside the loop at step 2: the needle has to come up inside it, or there is nothing for the tack to catch.
- Going down in a new hole at step 2: use the same hole (1) so the petal starts as a neat point.
- A tacking stitch that is too long: keep it small unless you want a long tail on purpose.
- Uneven petals: mark the center and the petal tips before you start so all five come out the same length.
Lazy daisy vs. similar stitches
A lazy daisy is chain stitch with the links cut apart. In a continuous chain each new loop starts inside the last one. Here every loop gets its own tack, and the next stitch starts somewhere new. That is why the same stitch is also called detached chain.
Feather stitch also catches the thread under the needle, but it makes open V-shaped branches that travel along a line instead of closed loops. To finish a flower, pair your daisies with stem stitch for the stalks, or outline a larger shape in split stitch.
Flowers, curves and layout
For a flower, mark a small center circle and work each petal outward from it. If you want more than five petals, make the center circle a little bigger so the loops do not pile up.
For a curving vine, stitch the stem first, then set the leaves along it with each tip pointing the way the vine grows.
Variations
Once the basic loop feels easy, small changes give new shapes. A long-tailed lazy daisy stretches the tacking stitch into a stalk. A double lazy daisy nests one loop inside another, often in a second color. You can also lay a straight stitch inside each petal in a lighter shade for depth, or finish the flower with a French knot in the center.
Questions
Is a lazy daisy the same as a detached chain stitch?
Yes. They are two names for one stitch: a single chain stitch loop held at its tip by a small tacking stitch.
How many petals does a lazy daisy flower have?
Five is the classic number, and it is what step 4 shows. You can use more or fewer; mark the center and the petal tips first so they come out even.
Why does my lazy daisy look like a straight line?
The loop was pulled too tight before tacking. Let it rest round the needle, pull gently, and take the tack just over the top of the loop.
How many strands of floss should I use for lazy daisy?
Two or three strands of six-strand floss suit most small flowers. Use more for a bold, rounded petal.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
Traditional stitch. Step diagrams drawn by broiderer.com.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.