Skip to content
broiderer

Table and bed

Envelope Pillow Cover Size Chart

Enter your pillow insert's width and height and how much you want the two back pieces to overlap. You get the front and back pieces to cut, the finished cover size, and the fabric you need.

Published Nov 13, 2026

Your numbers

runs in your browser, nothing is saved

Front
cut 1 at 18 × 18 in
Back (envelope)cut 2 at 18 × 12 in
Finished cover17 × 17 in (snug, full look)
Fabric1¼ yd if cut from 42 in fabric in one column

Typical sizes; brands differ. Measure your table, pillow or bed.

Worked example

  1. Cut the front the same size as the insert; ½ in seams make the cover 1 in smaller, so the insert fills it
  2. Each back half: 18 ÷ 2 + 4 ÷ 2 overlap + 1 in for a double ½ in hem = 12 in
  3. Hem one long edge of each back, lay them over the front right sides down, overlapping, and sew all round

Envelope pillow cover cutting chart (4 in overlap)

InsertFrontTwo backsFinished cover
12 × 20 in12 × 20 in12 × 13 in11 × 19 in
14 × 14 in14 × 14 in14 × 10 in13 × 13 in
16 × 16 in16 × 16 in16 × 11 in15 × 15 in
18 × 18 in18 × 18 in18 × 12 in17 × 17 in
20 × 20 in20 × 20 in20 × 13 in19 × 19 in
22 × 22 in22 × 22 in22 × 14 in21 × 21 in
24 × 24 in24 × 24 in24 × 15 in23 × 23 in

Shops sell covers 2 in smaller than the insert (an 18 in cover on a 20 in insert); sewn covers cut at insert size end up 1 in smaller.

Bed pillow sizes

PillowSize
Standard20 × 26 in
Super standard20 × 28 in
Queen20 × 30 in
King20 × 36 in
Euro26 × 26 in
Body20 × 54 in

Cut the front the size of the insert

An envelope cover has no zipper and no buttons. The back is two hemmed pieces that overlap in the middle, and the insert slips in through the gap. For the front, cut a piece exactly the size of the insert: 18 × 18 in for an 18 in pillow. With ½ in seams all round, the finished cover comes out 17 × 17 in, 1 in smaller than the insert, so the insert fills the corners and looks plump instead of floppy.

Shops go further and sell covers 2 in smaller than the insert, such as an 18 in cover on a 20 in insert. If you have bought covers before and liked how full they looked, that is the reason. To match it when sewing, cut the front 1 in smaller than the insert.

How the back pieces are sized

Each back piece is half the insert, plus half the overlap, plus 1 in for a double ½ in hem on the edge that shows. For the 18 in insert with a 4 in overlap: 9 + 2 + 1 = 12 in, so you cut two pieces 18 × 12 in. An overlap of 3 to 4 in is typical. Less than that and the opening gapes when someone leans on the pillow; much more and the back gets bulky.

On a lumbar pillow the opening runs across the short way. For a 12 × 20 in insert the backs are 12 × 13 in: half of 20 is 10, plus 2 for the overlap and 1 for the hem.

Putting it together

  • Hem one long edge of each back piece: fold ½ in, fold ½ in again, and stitch.
  • Lay the front right side up. Place one back on it right side down, raw edges matching one end, then the second back at the other end so the hems overlap in the middle.
  • Pin and sew all round with a ½ in seam, backstitching over the overlap where the cover takes the most strain.
  • Clip the corners, turn right side out, press, and push the insert in.

Fabric and the bed pillow chart

Cut in one column from 42 in fabric, the 18 in cover needs 18 + 12 + 12 = 42 in of length, so buy 1¼ yd. You can save fabric by cutting the front from a fat quarter, which is about 18 × 21 in and fits a 16 or 18 in front. The fat quarter calculator helps you plan that. If your print has a direction, cut both backs the same way up as the front.

The bed pillow chart is there for shams. A Euro pillow is 26 × 26 in, so it follows the same rule: a 26 in front and two backs of 26 × 16 in. For pillowcases with a cuff on standard to king pillows, go to how to make a pillowcase.

Questions

What size do I cut an envelope pillow cover for an 18 in insert?

One front at 18 × 18 in and two backs at 18 × 12 in, with a 4 in overlap and ½ in seams. The cover finishes at 17 × 17 in.

How much should the back of an envelope cover overlap?

3 to 4 in is typical. The chart uses 4 in.

What size insert for a 20 in cover?

Shops pair a cover with an insert 2 in larger, so a 22 in insert. If you sew the cover, cutting the front at insert size already makes it 1 in smaller.

Do I need to prewash the fabric?

Yes if you plan to wash the cover. Test a swatch first, because a front and back that shrink differently will pull the cover out of square.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.