Table and bed
How to Make a Pillowcase
Pick your pillow size and how deep you want the cuff. You get the finished pillowcase size, the body and cuff pieces to cut, and the fabric to buy.
Published Nov 6, 2026
Worked example
- The case is one tube: twice the pillow width 20 = 40 in, plus 1 in for one ½ in side seam = 41 in
- Finished length = pillow 26 + 4 in so the pillow tucks in = 30 in
- The cuff folds in half: 2 × 4 + ½ in seam = 8½ in tall
- Body: 30 − 4 cuff + ½ in seam at each end = 27 in
Pillowcase cutting sizes (4 in cuff, ½ in seams)
| Pillow | Pillow size | Finished case | Body cut | Cuff cut |
|---|---|---|---|---|
| Standard | 20 × 26 in | 20 × 30 in | 41 × 27 in | 41 × 8½ in |
| Super standard | 20 × 28 in | 20 × 32 in | 41 × 29 in | 41 × 8½ in |
| Queen | 20 × 30 in | 20 × 34 in | 41 × 31 in | 41 × 8½ in |
| King | 20 × 36 in | 20 × 40 in | 41 × 37 in | 41 × 8½ in |
Why the case is longer than the pillow
A standard pillow is 20 × 26 in, but the case is 20 × 30 in. The extra 4 in is room for the pillow to slide in and for the open end to hang past it, so the pillow does not poke out of the cuff. Many bought pillowcases follow the same idea, such as a 20 × 40 in king case for a 20 × 36 in pillow. If you like a looser case, add a little more length; the calculator keeps the tuck at 4 in.
The width stays at 20 in for every bed pillow except the 26 × 26 in Euro, so the cut width is the same 41 in for all four sizes in the chart. Only the body length changes.
Reading the cut sizes
The case is one tube with one side seam. Its width is twice the pillow width plus 1 in for the ½ in seam: 2 × 20 + 1 = 41 in. The cuff is folded in half, so a 4 in finished cuff is cut 2 × 4 + ½ = 8½ in tall. The body is the finished length minus the cuff, plus ½ in at each end for the cuff seam and the bottom seam: 30 − 4 + 1 = 27 in.
One thing to check before you buy: 41 in is close to the usable width of quilting cotton, which is often 40 to 42 in once the selvages are trimmed. If yours measures less than 41 in, cut the body and the cuff from two pieces 21 in wide each and sew a seam on each side instead of one.
Sewing it, step by step
- Fold the cuff in half lengthwise, wrong sides together, and press.
- Pin the cuff's raw edges to one 41 in edge of the body, on the right side, and sew with a ½ in seam.
- Press the seam toward the body. Finish the raw edges with a zigzag, or use a French seam if you want no raw edges inside.
- Fold the body in half right sides together so the cuff edges match, and sew the long side and the bottom with ½ in seams.
- Finish the seams, clip the bottom corner, turn right side out, and press.
Fabric, prints and prewashing
For a standard case from 42 in fabric, buy ¾ yd for the body and ¼ yd for the cuff. A contrast cuff is where small pieces shine, and a third fabric folded into the cuff seam as a narrow trim is an easy addition.
With a one-way print, decide which end is up before you sew the cuff on, so the print runs away from the opening. Prewash everything, or at least test a swatch: a pillowcase is washed every week, and a cuff that shrinks more than the body puckers the seam. Pillow inserts for the couch need a different cut; see the pillow cover size chart, and the fabric yardage calculator for larger projects.
Questions
How much fabric do I need for a pillowcase?
For a standard case from 42 in fabric, ¾ yd for the body and ¼ yd for the cuff.
What size is a standard pillowcase?
20 × 30 in finished, for a 20 × 26 in pillow.
What size do I cut for a king pillowcase?
With a 4 in cuff, a body of 41 × 37 in and a cuff of 41 × 8½ in, for a finished case of 20 × 40 in.
What seam allowance does a pillowcase use?
The cut sizes here use ½ in seams throughout. The seam allowance page explains other common widths.
How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.
broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.