Skip to content
broiderer

Table and bed

Round Tablecloth Sizes

Enter your round table's diameter and the drop you want. You get the cloth diameter, the nearest standard round cloth with the drop it really gives, and the circle to cut if you sew it.

Published Nov 2, 2026

Your numbers

runs in your browser, nothing is saved

Tablecloth
64 in round
Nearest standard size70 in round (11 in drop)
To sew itcut a 66 in circle for a ½ in double hem

Typical sizes; brands differ. Measure your table, pillow or bed.

Worked example

  1. Diameter 48 + 2 × 8 drop = 64 in
  2. The smallest standard round at least that big is 70 in, giving a 11 in drop
  3. A floor-length cloth on a 30 in table needs a 30 in drop

Round tablecloth by table diameter

Table8 in drop15 in dropFloor length (30 in)
30 in46 in60 in90 in
36 in52 in66 in96 in
42 in58 in72 in102 in
48 in64 in78 in108 in
54 in70 in84 in114 in
60 in76 in90 in120 in
72 in88 in102 in132 in

What each standard round fits

Round clothShort drop (about 8 in)Floor length
70 in54 in tableno
90 in74 in table30 in table
108 in92 in table48 in table
120 in104 in table60 in table
132 in116 in table72 in table

One number to measure

A round table has only a diameter, so the math is short: diameter plus two drops. A 48 in table with an 8 in drop needs 48 + 16 = 64 in. Measure straight across the top through the center, edge to edge. If you measure off-center you get a smaller number, so swing the tape a little and take the longest reading.

A pedestal table often has a top that overhangs the base by a lot. Only the top counts.

The five standard rounds and what they really give

Round cloths are sold in 70, 90, 108, 120 and 132 in. That is a coarse list, and the gaps matter more than they do for rectangles. The 64 in cloth our 48 in table needs does not exist, so the calculator moves up to 70 in, and the drop grows from 8 to 11 in. On a 60 in table, the 90 in cloth falls 15 in, a dressy partial drop, while the 120 in cloth reaches the floor.

The floor-length sizes line up neatly with table sizes because a 30 in tall table needs 60 in added to its diameter: 90 in for a 30 in table, 108 in for 48, 120 in for 60 and 132 in for 72. Between those, you either accept a cloth that pools a few inches on the floor or one that stops short. The second chart above shows each standard cloth with the table it fits.

Why a round cloth looks shorter than its numbers

On a round table the drop is the same all the way around, so there are no long sides to hide a short end. That makes the drop easy to judge by eye, and a cloth that is 2 in too short looks short everywhere. When in doubt between two sizes, sit at the table with a sheet draped over it and see where the edge falls on your lap before you choose.

Cutting and hemming a circle

For a 64 in finished cloth, cut a 66 in circle: the ½ in double hem uses 1 in all around, which is 2 in on the diameter. Fold the fabric in quarters, pin a tape measure at the folded corner, and mark an arc at the radius, here 33 in. Cut through all layers along the arc.

Few fabrics are 66 in wide, so a round cloth usually needs a seam. Join a full width down the middle and a strip on each side before you fold and mark, so the seams sit off-center. Hemming a curve takes more pressing than a straight edge; work a few inches at a time and ease the fullness into the fold. The fabric widths chart helps you plan the panels, and how much fabric is in a yard converts the length you need.

Questions

What size round tablecloth fits a 60 in table?

A 120 in cloth reaches the floor on a 30 in tall table. A 90 in cloth gives a 15 in drop.

What size tablecloth for a 48 in round table?

A 70 in cloth gives an 11 in drop, and a 108 in cloth goes to the floor.

Can I put a 70 in round on a 54 in table?

Yes. It hangs 8 in all around, a casual everyday drop.

What about rectangle and banquet tables?

Those are on the tablecloth size chart, and the tablecloth size calculator works for any shape of your own table.

How we calculate: every rule and rounding step is on our method page; where the sizes and facts come from is on sources.

broiderer.com is not affiliated with any fabric, thread or sewing machine brand. Last reviewed November 2026.